RIDGID R4041S Tile Saw Review: Cuts 24-Inch Rip Capacity With a Drop Gate

What the R4041S Is, and Who For

RIDGID R4041S Wet Tile Saw cuts 2-3/4 in material for you if you need a saw for thicker tile and pavers.

A wet tile saw with 24 in of rip capacity gives you room to handle longer tile runs without forcing every cut into a short pass.

RIDGID R4041S fits that job with a 24 in rip capacity, plus 18 in diagonal capacity and 0 to 45 degree miter cuts left and right. The 2-3/4 in deep capacity and 1.2 HP motor matter when your material is thicker, while the 8 in blade keeps the saw in the compact class. It is priced around $123.50 and carries a 4.2 average from 7 buyer ratings, which is too small a sample to prove much either way.

We screened 20 Tile Saws, and this is one of 14 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 7 buyer ratings, the 12th most of the 20 screened. This review is for budget-first shoppers who want the numbers that decide fit before they spend.

The Short Answer on the R4041S

Best for: you want an 8-inch wet tile saw for repeated ceramic cuts and 0 to 45-degree miter work.

Choose the R4041S if you want a corded wet saw with 24-inch rip capacity, and it costs around $123.50.

• Pro: The 1.2 HP motor gives you enough drive for repeated cuts on ceramic tile without bogging down.
• Pro: A 24-inch rip capacity and 18-inch diagonal capacity support longer tile layouts and angled cuts.
• Pro: The 0 to 45-degree miter range lets you make standard angled edge cuts for corners and transitions.
• Con: The 2-3/4-inch maximum cut depth limits thicker material, so oversized stone or deep cuts are out.
• Con: Its 72.8-pound weight makes it a poor fit if you need frequent lifting between jobsites.

Don’t buy this if: you need a 10-inch tile saw for large-format tile, because this model uses an 8-inch blade.

Price assessment: Around $123.50 is low for a corded wet saw with a stand included and 24-inch rip capacity.

Consider our full review of the POWERTEC PRO TLS1003 for a detailed spec analysis.

The Numbers on the Spec Sheet

The motor power row separates this saw most, because 1.2 HP measures the drive output that helps determine how much cutting load it can handle.

Before You Buy: Tile Saw Checklist

The first thing to check is whether the 24 in. rip capacity matches the longest tile or threshold piece you plan to cut. If your material needs a longer rip, you will have to split the cut, change the layout, or choose a saw with more reach.

• ☐ Confirm your longest rip fits within 24 in. — if it does not, you will be forced into two-pass cuts or a different saw.
• ☐ Check your thickest piece against the 2-3/4 in. maximum cut depth — if the piece is thicker, you cannot make the cut in one pass and may need to rework the job.
• ☐ Measure whether your angled cuts need the 0 to 45 degree miter range — if you need a steeper angle, this saw will not cover that cut and you will need another setup.
• ☐ Budget for the 72.8-pound weight — if you need frequent carrying, you may end up with a saw that is hard to move and awkward to store.
• ☐ Confirm you have a 120V corded electric power source — if you do not, the saw will not suit your site and you will need a different power plan.
• ☐ Check that you want a wet saw with a removable water tray — if you skip this, you may end up with a workflow that does not suit your cleanup tolerance.

Do not buy this saw if your cuts need more than 24 in. of rip reach or thicker material than 2-3/4 in. in one pass.

What Performance Means in Practical Tile Saw Use

How 24-Inch Rip Capacity Handles Large-Format Tile

R4041S gives you 24 inches of rip capacity, so it can handle long straight cuts on large-format tile without forcing every piece through in sections. That matters most when you are laying 12×24 tile, because the cut length is the constraint, not the blade diameter.

Its 18-inch diagonal capacity adds room for angled layout work on square tile and larger rectangles. Can it handle thick pavers or natural stone, or is that too much for it? The 1.2 HP motor and 2-3/4-inch maximum cut depth are the figures that matter there, and the depth figure is the limiting one for thick material in a single pass.

How 0-to-45-Degree Miter Cutting Handles Corner Transitions

The R4041S cuts from 0 to 45 degrees left and right, which lets you make corner transitions and finished edge cuts without changing tools. That range covers the standard miter work many tile jobs need, including trim pieces that meet at an outside corner.

Because the bevel span reaches 45 degrees, you can set up angled cuts for backsplash edges, thresholds, and other visible transitions. The 18-inch diagonal capacity also helps when the tile must sit at an angle rather than square to the fence, so the saw supports more than straight rip work.

Why the Removable Water Tray Simplifies Cleanup

The removable water tray makes cleanup easier after wet cutting, because you can lift out the tray instead of working around a fixed basin. The saw is a wet model, so the tray matters most if you want faster slurry disposal between cuts.

That cleanup advantage matters more on a 72.8-pound corded saw, since moving the whole unit around to rinse it is less convenient than removing the tray. The stand is included, so you get a more stable setup for wet cutting, but the weight still makes tray access part of the daily workflow.

Which Jobs the R4041S Handles, Worked Out From Its Specs

The R4041S against the jobs buyers ask about, worked out from its listed motor power and a typical need for each job.

You can find out if the 12 Amp 8 in. Wet Tile Saw handles dense porcelain without stalling during your project.

Where the R4041S Sits Among the Alternatives

For corner trim and backsplash work, the 0 to 45 degree bevel range gives you angled cuts, and this saw also states an 8 in. blade, 2-3/4 in of cut depth, and 24 in of rip capacity. Those figures matter because the bevel range handles the angle, while the blade size and cut depth set how much material the saw can take in one pass.

• R4041S has the largest blade diameter among the six compared here that state it, at 8 in.; the others list 7 in. or smaller, so this model gives you the most wheel size in the group.
• Its 2-3/4 in maximum cut depth is also the largest among the three listings that state depth, which matters if your tile or paver is thicker and you want one-pass capacity.
• The 1.2 HP motor is stronger than the 1/2-horsepower MK 158252 MK-145 and the 2/3 HP Ironton 7in. Wet Tile Saw, so it gives you more drive for repeated ceramic cuts.
• Against the SKIL 3540-01 Wet Tile Saw, the price is almost the same, with this saw around $0.90 more expensive. That gap is small, so the decision comes down to the larger 8 in. blade and deeper 2-3/4 in cut capacity here.
• Compared with the 7 Inch Wet Tile Saw, this model costs about $4.51 more and states a 24 in rip capacity. The other saw lists 7 in. blade size, so this one gives you more reach for longer cuts.
• The DEWALT DWC860W is lighter at 6.6 lb, while this RIDGID weighs 72.8 pounds and includes a stand. If portability matters more than a wet saw setup with support, the DEWALT is the easier carry.
• R4041S ranks first on buyer rating in this comparison, at 4.2 from 7 ratings. That sample is too small to settle anything about quality, so treat it as context only.

If you want the lightest carry, pick the DEWALT DWC860W instead. If you care more about moving a wet saw with a stand and larger 8 in. cutting hardware, this RIDGID is the better fit.

View our detailed breakdown of the MK-145 wet saw to see how it performs.

What It Takes to Run the R4041S

Power setup for the R4041S

The R4041S needs corded electric power before it can cut anything.

1. Unpack the saw and set aside the 72.8-pound body on a stable work surface.
2. Install a diamond blade with an arbor size that matches the saw; this listing does not state the arbor size.
3. Fill the removable water tray before you start any wet cut.
4. Connect the corded electric supply, using an extension cord only if it matches the saw’s power needs and reach.
5. Set the miter guide for a 0 to 45 degree cut, then make a first pass on material within the 2-3/4 in depth limit.

Warranty and support checks for R4041S

Warranty cover varies by seller and country.

• Confirm the blade arbor size before your return window closes, because the listing does not state it and the diamond blade has to fit.
• Confirm whether the bare-tool package includes the blade you need, because the listing names no cutting blade among the included components.
• Confirm the extension cord length and rating you plan to use, because corded electric power is the only stated power source.
• Confirm that the 72.8-pound saw is complete and undamaged, because that weight makes return shipping and replacement awkward.

On the day it arrives, check the box contents and the arbor size first, while a return is still possible.

Questions Buyers Ask About This Tile Saw

Cutting capacity and angle range

R4041S uses an 8 in. blade, a 2-3/4 in maximum cut depth, and a 0 to 45 degree bevel range. That combination suits smaller tile work and angled edge cuts, but it leaves less room for thick material than a 10-inch saw.

What the 1.2 HP motor means

The 1.2 HP motor gives this saw enough drive for repeated ceramic cuts, and the data also says it can handle a weekend backsplash at the easier end of the needed range. For dense porcelain, the same figure sits at the easier end of the requirement, so you should not expect the same margin there.

How Rip Capacity and Layout Affect Common Tile Cuts

A 24 in rip capacity and 18 in diagonal capacity give R4041S room for many common tile layouts. The drop gate feature matters because it supports unlimited rip cuts on plank tile, which is useful when straight cuts repeat across long pieces.

What 72.8 Pounds and an Included Stand Mean for Setup

At 72.8 pounds, this wet saw is not a light carry. The stand is included, so the weight is easier to place in one work area than on a bare bench.

FAQ

Can the RIDGID R4041S cut large-format tile in one pass?

No, the R4041S does not state the capacity needed for that job. Its 24 in rip capacity and 18 in diagonal capacity cover many layouts, but the data does not state a large-format limit by tile size.

Is the RIDGID R4041S good for porcelain tile?

R4041S has a 1.2 HP motor, and the job data says that level is enough only at the easier end of the range for dense porcelain. That means it is a better fit for lighter porcelain work than for the tougher end of the job.

Does the RIDGID R4041S include a stand?

Yes, the R4041S states that a stand is included. That helps because the saw weighs 72.8 pounds, so a stand gives the setup a defined place to live during a project.

How far does the RIDGID R4041S bevel?

The R4041S bevels from 0 to 45 degrees. That range supports mitered edge cuts for corners and finished transitions, which is why the angle figure matters more than the blade name here.

For a weekend backsplash, R4041S has enough motor power on paper to keep up with repeated ceramic cuts. The removable water tray and wet-saw format also point to a cleaner workflow than a dry cutter.

Is the R4041S Right for You?

Who the R4041S suits and the jobs it is the wrong choice for, listed below with the reason for each.

If you need more options, explore our roundup of the best portable tile saws for smaller tasks.

Where to Buy This Tile Saw

When we looked in November 2026, the R4041S was listed at $123.50 – a snapshot that may have changed since.

Tile saws are sold by the retailers below – we do not track which of them has the R4041S in stock, so check availability and the current price with the retailer before making a trip.

• Toolbarn (online only) — specialist tool retailer with a focused selection
• Home Depot (online and physical stores) — broad range of tile saws and easy in-store returns
• Lowe’s (online and physical stores) — broad range of tile saws with physical-store pickup and returns
• Amazon (online only) — broad selection across brands and models
• Acme Tools (online only) — specialist power-tool retailer with knowledgeable staff and trade accounts
• Northern Tool (online and physical stores) — useful for contractor-oriented tool selection and store pickup
• Grainger (online and physical stores) — business and trade accounts for professional buying

Final Verdict on the R4041S

If you need an 8 in. wet tile saw with a 0 to 45 degree bevel range and a 24 in rip capacity, the R4041S fits that job at around $123.50.

Its 1.2 HP motor is the key figure here. That output is enough for repeated cuts on ceramic tile, but it is not enough for keeping large-format tile from wandering under heavier load.

Skip it if: you need a saw for large-format tile that needs steadier cutting load, or you want more than 2-3/4 in of cut depth.