New Hardware is reader-supported: some links on this page are affiliate links, and as an Amazon Associate New Hardware earns from qualifying purchases at no extra cost to you. Learn more.
Ironton 7in. Wet Tile Saw
Ironton 7in. Wet Tile Saw bevels to 45 degrees, so it suits you if angled tile cuts matter on site.
7in. blade diameter
- blade diameter
- 7in.
- motor power
- 2/3 HP
- bevel angle range
- 45
$86 under the category median
- This Tile Saw
- $104.99
- Median of the 20 Tile Saws we screened
- $191.22
- Range
- $104.99 to $1131.62
- Cheaper than this one
- 0 of those 20
4.2/5 from 3 buyers
- Average buyer rating
- 4.2 out of 5
- Ratings behind it
- 3
- What that supports
- Too small a sample to conclude anything either way
- Where it comes from
- The product listing, read 5 November 2026
1 deciding spec not stated
- maximum cut depth
- Not stated in the listing – confirm with the seller before ordering
What the Ironton 7in. Wet Tile Saw Is, and Who For
Ironton 7in. Wet Tile Saw cuts 7in.
A weekend backsplash can move from layout to cut pieces with a 7in. wet saw, but the motor rating decides how much load it can carry.
Ironton 7in. Wet Tile Saw pairs a 7in. diamond wheel with a 2/3 HP motor, so the cutting setup is sized for lighter tile jobs. It also bevels tiles up to 45 degrees and includes a 5/8in arbor.
We screened 20 Tile Saws, and this is one of 14 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 3 buyer ratings, the 15th most of the 20 screened. Around $104.99 and a 4.2 average from 3 ratings give background only; that sample is too small to settle anything. This review is for you if you want a wet saw for ceramic and stone tile and need the numbers before you order.
How New Hardware picked: we started from the 25 most-reviewed Tile Saw listings in our retail dataset, removed duplicates, accessories and off-category products, and 20 qualified. This product is one of 14 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the Ironton 7in. Wet Tile Saw
Best for: you need a 7-inch wet tile saw for light tile work and can live with a 2/3 HP motor.
Choose the Ironton 7in. Wet Tile Saw if your cuts are short and your material is not demanding; it is around $104.99.
- Pro: The 7-inch blade size suits compact tile-cutting jobs.
- Pro: The 45-degree bevel lets you make angled edge cuts for corners.
- Pro: It states a 110V, 3,600 RPM setup with a 5/8in arbor.
- Con: The 2/3 HP motor is below the 0.75 to 1 HP range needed for repeated ceramic cuts, so it is not the right pick for that pace.
- Con: It is rated 4.2 from 3 buyer ratings, and that sample is too small to settle anything about reliability.
Don’t buy this if: you need a saw that can handle dense porcelain or large-format tile without stalling; this 2/3 HP model does not fit that job.
Price assessment: $104.99 is a low price for a 7-inch wet tile saw with beveling, but the motor spec keeps it in the budget tier.
New Hardware score: 7.7/10 (data-driven – see “How we picked” above)
You can also view the complete spec breakdown for the Rubi DT-10IN.
The Numbers on the Spec Sheet
| Spec name | Value |
|---|---|
| Blade diameter | 7in. |
| Maximum cut depth | Not stated |
| Motor power | 2/3 HP |
| Bevel angle range | 45 |
| Arbor size | 5/8in |
| Saw type | wet saw |
| Voltage | 110V |
| RPM | 3,600 RPM |
| Blade included | 7in carbide-tipped blade |
Motor power separates this Ironton saw most clearly. That 2/3 HP figure measures the engine output that drives the blade.
Where this sits in the buyer data: Among the 16 products screened for this category, this one’s 4.2 rating places it #7, on 3 ratings – below the 64-rating median of that group, so treat the average as less settled than its comparables. On price it undercuts 19 of them.
Before You Buy: Tile Saw Checklist
- ☐ Confirm the blade size — 7in. blade diameter; if your work needs a larger wheel, you will have to buy a different saw instead of forcing this one to do a bigger job.
- ☐ Check the power supply — 110V; if your site or garage is not set up for that outlet standard, you will need another circuit or a different saw.
- ☐ Measure your bevel need — 45 degrees; if you need a different angle range, you will be stuck with a saw that cannot make the cut you planned.
- ☐ Confirm the drive strength for your material — 2/3 HP; if you are planning repeated cuts on ceramic, the motor figure is below the 0.75 to 1 HP need used for that job, so you may need to step up to a different saw.
- ☐ Check the arbor fit — 5/8in; if your blade or accessory uses a different arbor size, you will need to replace the wheel or return the saw.
- ☐ Budget for wet cleanup — saw type wet saw; if you want a dry-cut workflow, this is the wrong format and you will be living with water and slurry at the cut line.
Do not buy this saw if you need a 1 HP-class machine for dense porcelain or large-format tile, because the 2/3 HP motor does not support that job.
Practical performance in real tile cutting
What 45-degree bevel cuts do for corners
The 45-degree bevel range lets you make mitered edge cuts for corners and finished transitions. Ironton 7in. Wet Tile Saw states a full 45-degree tilt range, so this is the setting that matters for trim pieces where the edge needs to meet cleanly at an angle rather than square.
If your trim work needs angled edges, measure the corner layout before you buy and compare it with a 45-degree bevel path. A 45-degree setting supports that kind of finish work; if your job depends on steeper or more varied angles, this saw does not state those options.
Ceramic and Stone Tile Cutting
The ceramic and stone tile cutting setup gives you a 7-inch blade and a 2/3 HP motor for light tile work. That combination supports wall tile, floor tile, ceramic, and stone cuts, but the 2/3 HP rating is the limit that matters when you want steady feed through denser material.
For repeated cuts on ceramic tile, the 2/3 HP figure is the trade-off to watch. Our job-based review says repeated ceramic cuts need at least 0.75 to 1 HP, so this saw’s 0.67 HP motor is not enough for that workload, and it is also short of the power usually needed for dense porcelain or large-format tile.
Why a portable 7-inch setup suits jobsite cuts
The portable 7-inch setup keeps this saw in the smaller tile-saw class. The 7-inch blade, 5/8-inch arbor, 110V supply, and 3,600 RPM speed point to a jobsite-friendly wet saw for cuts where portability matters more than large-format capacity.
That smaller format suits backsplash work, small repairs, and other jobs where you move the saw more often than you move large tile. The flip-up miter guide adds a second useful setup for angled cuts, while the included carbide-tipped blade means you can start with the supplied wheel instead of buying one separately.
Common Buyer Jobs Checked Against the Ironton 7in. Wet Tile Saw’s Specs
The Ironton 7in. Wet Tile Saw against the jobs buyers ask about, worked out from its listed motor power and a typical need for each job.
| Job | What it takes | Ironton 7in. Wet Tile Saw |
|---|---|---|
| Make repeated cuts on ceramic tile without bogging down | at least 0.75 to 1hp | No – 0.67hp |
| Finish a weekend backsplash with a saw that keeps up | at least 0.75 to 1.25hp | No – 0.67hp |
| Handle dense porcelain for a small remodel without stalling | at least 1 to 1.5hp | No – 0.67hp |
| Keep cutting large-format tile without the blade wandering | at least 1.25 to 1.75hp | No – 0.67hp |
Where the Ironton 7in. Wet Tile Saw Sits Among the Alternatives
The Ironton 7in. That combination matters if you want the lowest entry price without giving up the same blade size and bevel range that several higher-priced rivals also state.
- Compared with the 7 Inch Wet Tile Saw, Ironton is about $14 cheaper while keeping the same 7-inch blade diameter.
- Against the SKIL 3540-01 Wet Tile Saw, Ironton saves about $17.61 and still states a 45-degree bevel range, while SKIL’s bevel range is also 0 to 45 degrees.
- Relative to the RIDGID R4041S 12 Amp 8 in. Wet Tile Saw, Ironton is lighter on motor power at 2/3 HP versus 1.2 HP, so RIDGID is the stronger pick for heavier cutting loads.
- Compared with the DEWALT DWC860W, Ironton uses a wet-saw setup and includes a 7in. carbide-tipped blade, while DEWALT is a dry-cutting tool with a 10.8 amp motor and no included blade listed here.
- Among the five comparable models, Ironton is the highest-rated at 4.2 from 3 buyer ratings, but that sample is too small to settle anything about quality or reliability.
If you need more motor headroom for dense tile or repeated cuts, the RIDGID R4041S 12 Amp 8 in. Wet Tile Saw is the better pick. Its 1.2 HP motor gives it more reserve than Ironton’s 2/3 HP.
What the deciding spec costs here: Measured as price per unit of motor power, the reviewed product works out to $157.48 against a $275.90 median across the 7 other screened products that state the spec, and 2 of them deliver more of it per dollar. The cheapest screened product that beats its 2/3 HP is the RIDGID R4041S at $123.50 with 1.2 HP, so more of the spec that decides this category starts $18.51 above this one.
For a more heavy-duty option, see our full review of the DEWALT D24000.
What It Takes to Run the Ironton 7in. Wet Tile Saw
Power and fit before the first cut
A 110V outlet is the one thing this saw needs before it does useful work.
- Unpack the saw and confirm the blade size is 7in before you set it near the work area.
- Fit a diamond blade with a 5/8in arbor so the wheel matches the saw’s arbor size.
- Place the saw where a 110V supply reaches it directly, or use an extension cord that matches the same voltage.
- Set the bevel angle to 45 degrees for angled cuts on wall or floor tile.
- Start with the included 7in carbide-tipped blade, then make a straight cut through ceramic or stone tile.
Warranty and support checks for This Tile Saw
Cover varies by seller and country.
- Confirm the return window before you cut, because the 2/3 HP motor is the part that determines whether this saw keeps pace with your job.
- Confirm blade replacement terms, because a 7in diamond blade with a 5/8in arbor is a wear item you may need to replace quickly.
- Confirm what support covers for the 110V electrical side, because the saw depends on mains power and an extension cord may be part of your setup.
- Confirm whether angle-setting issues are covered, because the bevels up to 45 degrees and the flip-up miter guide are the features most tied to cut accuracy.
When it arrives, plug it into a 110V outlet and make one test cut while the return window is still open.
Questions Buyers Ask About This Tile Saw
Can the Ironton 7in. Wet Tile Saw handle a weekend backsplash?
No, the Ironton 7in. Wet Tile Saw is not a strong match for a weekend backsplash if you need steady cutting. Its 2/3 HP motor is below the 0.75 to 1.25 hp range that this job typically needs, so the margin is thin for repeated cuts.
Does the Ironton 7in. Wet Tile Saw bevel tiles?
Yes, the Ironton 7in. Wet Tile Saw bevels tiles up to 45 degrees. That angle lets you make mitered edge cuts for corners and finished transitions. The bevel range is the deciding figure here, not the blade size.
Is the Ironton 7in. Wet Tile Saw good for dense porcelain?
No, the Ironton 7in. Wet Tile Saw is not suited to dense porcelain for a small remodel if you need it to keep pace without stalling. The motor is 2/3 HP, while that job usually needs 1 to 1.5 hp. The 7-inch blade size does not change that load limit.
What size blade does the Ironton 7in. Wet Tile Saw use?
The Ironton 7in. Wet Tile Saw uses a 7-inch blade. That size places it in the smaller portable tile saw class, which suits trim cuts and lighter work better than deep, large-format cuts. The included blade is carbide-tipped.
Is the Ironton 7in. Wet Tile Saw Right for You?
Who the Ironton 7in. Wet Tile Saw suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who the Ironton 7in. Wet Tile Saw is for, and what it does well
Who this Tile Saw suits
- DIY homeowners installing bathroom or kitchen tile — the portable 7in wet saw and 45-degree beveling suit small renovation cuts and corner finishes
- Flooring installers doing light-duty jobs — the 2/3 HP motor and 3,600 RPM are enough for ceramic and stone tile cutting on site
- Home remodelers working in garages or driveways — the wet-cut setup helps control dust while cutting wall and floor tiles
- Tile hobbyists making custom backsplashes — the flip-up miter guide and bevel range support repeated angled cuts
- Community workshop users with limited space — the compact 7in blade size and portable design fit occasional tile work without a large shop machine
What this Tile Saw handles well
- Cutting ceramic wall tile for a backsplash — the 7in diamond wheel and 3,600 RPM suit ceramic tile cuts
- Trimming floor tile to fit around edges — the wet saw design and 2/3 HP motor handle routine tile sizing
- Making 45-degree bevel cuts for corners — the bevel angle range up to 45 degrees supports angled tile edges
- Straight cuts on stone tile for small projects — the included blade and 110V motor support basic stone tile cutting
- Repeated mitered tile cuts for trim pieces — the flip-up miter guide helps with consistent angled cuts
What This Tile Saw is the wrong choice for
- Cutting thick porcelain slabs — the 2/3 HP motor and 7in blade are limited for heavy, dense material
- Large-format tile production work — the 7in blade size limits cut depth and capacity for oversized tiles
- Dry indoor cutting without water — this is a wet tile saw, so it is not meant for dry-cut use
- Heavy commercial all-day tile fabrication — the 3/75 Amp, 110V setup is a light-duty power level
- Cutting masonry blocks or pavers — the saw is specified for ceramic and stone tile, not thicker masonry materials
What to budget alongside this Tile Saw, and what to skip
Accessories worth buying with this Tile Saw
- Water supply or hose hookup — a wet tile saw needs water to cool the blade and control dust
- Extension cord rated for 110V power tools — the saw needs a suitable power connection if an outlet is not nearby
- Replacement 7in diamond blade — the included blade will wear and tile cutting requires a compatible 7in wheel
- Tile safety goggles — wet cutting still throws chips and slurry during operation
- Ear protection — the 3,600 RPM motor can be loud during tile cutting
Accessories you can skip buying for this Tile Saw
- Extra large saw stand — the portable design means a separate heavy stand is usually unnecessary
- Separate miter gauge — the flip-up miter guide is already included
- A 45-degree bevel attachment — the saw already bevels tiles up to 45 degrees
Where to Buy This Tile Saw
When we looked in November 2026, the Ironton 7in. Wet Tile Saw was listed at $104.99 – a snapshot that may have changed since.
Tile saws are sold by the retailers below – we do not track which of them has the Ironton 7in. Wet Tile Saw in stock, so check availability and the current price with the retailer before making a trip.
- Amazon (online only) — broad selection across brands and models
- Acme Tools (online only) — specialist power-tool retailer with knowledgeable staff and trade accounts
- Northern Tool (online and physical stores) — useful for contractor-oriented tool selection and store pickup
- Grainger (online and physical stores) — business and trade accounts for professional buying
- Toolbarn (online only) — specialist tool retailer with a focused selection
- Home Depot (online and physical stores) — broad range of tile saws and easy in-store returns
- Lowe’s (online and physical stores) — broad range of tile saws with physical-store pickup and returns
Final Verdict on the Ironton 7in. Wet Tile Saw
You are cutting wall or floor tile, and a 7-inch wet saw with a 45-degree bevel is enough for that job. The Ironton 7in. Wet Tile Saw is around $104.99, and it gives you a 2/3 HP motor, 3,600 RPM, and a 5/8in arbor for small-format tile work.
Like a compact wrench, it does one size of job well, but it is not the tool for every fastener.
Skip it if: you need repeated cuts on ceramic tile without bogging down, or you are handling dense porcelain or large-format tile. The 2/3 HP motor is below the power level those jobs usually need.