New Hardware is reader-supported: some links on this page are affiliate links, and as an Amazon Associate New Hardware earns from qualifying purchases at no extra cost to you. Learn more.
7 Inch Wet Tile Saw
7 Inch Wet Tile Saw cuts at 3450 RPM, so it suits you if you need fast tile cuts in a compact setup.
7 inch blade diameter
- blade diameter
- 7 inch
- maximum cut depth
- 1.34 inches / 34 mm
- bevel angle range
- 0 to 45 Degrees
1 deciding spec not stated
- motor power
- Not stated in the listing – confirm with the seller before ordering
Suits diy homeowners installing kitchen or bathroom tile
- DIY homeowners installing kitchen or bathroom tile
- Tile setters doing small renovation jobs
- Homeowners finishing a single room remodel
- Craft and mosaic hobbyists cutting tile pieces
$72 under the category median
- This Tile Saw
- $118.99
- Median of the 20 Tile Saws we screened
- $191.22
- Range
- $104.99 to $1131.62
- Cheaper than this one
- 1 of those 20
Where the 7 Inch Wet Tile Saw Fits
7 Inch Wet Tile Saw cuts 1.34 inches deep for you if you need a 7-inch wet saw for light tile work.
A 0 to 45 Degrees bevel range gives you finished edge cuts without moving into a different saw setup, which changes the kind of work you can finish in one session.
7 Inch Wet Tile Saw pairs that angle range with a 7 inch blade and a 1.34 inches / 34 mm cut depth. That combination supports angled cuts on tile that still fits within the saw’s depth limit.
We screened 20 Tile Saws, and this is one of 14 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 21 buyer ratings, the 9th most of the 20 screened. It is priced around $118.99, and it carries a 3.6 average from 21 buyer ratings. This review is for you if you want a wet saw with an induction motor, a removable water reservoir, and 4.8AMP draw.
How New Hardware picked: we started from the 25 most-reviewed Tile Saw listings in our retail dataset, removed duplicates, accessories and off-category products, and 20 qualified. This product is one of 14 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the 7 Inch Wet Tile Saw
Best for: You need a compact wet tile saw for 7-inch blades and angled cuts up to 45 degrees.
Choose this 7 Inch Wet Tile Saw if you want a 120V wet saw with a 1.34-inch maximum cut depth for lighter tile work, at around $118.99.
- Pro: The 7-inch blade size suits common light-duty tile cuts.
- Pro: The 0 to 45 Degrees bevel range supports mitered edge cuts.
- Pro: The 1.34-inch maximum cut depth gives you a clear limit for thickness planning.
- Con: The 13 x 14-inch worktable limits support for larger tile pieces, so oversized layouts need more repositioning.
- Con: The 3.6 average from 21 buyer ratings is a thin sample, so the rating is still a weak signal.
Don’t buy this if: you need a 10-inch tile saw for large-format tile or deeper cuts.
Price assessment: Around $118.99 is fair for a 120V wet saw with a 7-inch blade and 45-degree beveling.
New Hardware score: 7.1/10 (data-driven – see “How we picked” above)
If you are working with harder materials, view our top-rated porcelain tile saws for more precise cutting.
The Specifications That Matter for this Tile Saw
| Spec | Value |
|---|---|
| Blade diameter | 7 inch |
| Maximum cut depth | 1.34 inches / 34 mm |
| Bevel angle range | 0 to 45 Degrees |
| Arbor size | 7 inch |
| Saw type | wet saw |
| Motor type | Induction motor |
| No load speed | 3450 RPM |
| Blade thickness | 16 mm |
| Worktable dimensions | 13 x 14 inches (330 x 360 mm) |
| Voltage | 120V |
Bevel angle range is the row that most separates this 7 Inch Wet Tile Saw. It measures the span of tilt angles the saw head or table can use for angled cuts.
Where this sits in the buyer data: Among the 16 products screened for this category, this one’s 3.6 rating places it #11, on 21 ratings – below the 64-rating median of that group, so treat the average as less settled than its comparables. On price it undercuts 18 of them.
Before You Buy: Tile Saw Checklist
The first thing to check is whether your tile thickness fits the 1.34-inch maximum cut depth, because that is what decides if the saw can finish the cut in one pass.
- ☐ Confirm your thickest tile against the 1.34-inch / 34 mm cut depth — if your material is thicker, you will need a different saw or you will be left with unfinished cuts.
- ☐ Check your bevel-cut plan against the 0 to 45 Degrees range — if you need a steeper angle, this saw will not make that cut and you will have to rework the job.
- ☐ Measure your largest tile against the 13 x 14 inches worktable — if the piece is too large to support safely, you will fight the setup and may need a bigger table saw.
- ☐ Confirm your power supply matches 120V at 60Hz and 4.8AMP — if your outlet cannot supply that setup, you will need another circuit or a different saw.
- ☐ Budget for wet-cut cleanup around the removable water reservoir — if you need a dry-cut workflow, this wet saw will leave you with water handling you did not plan for.
- ☐ Check whether the 7-inch blade size suits your job — if you need a larger wheel for deeper or larger-format work, you will have to buy a different saw.
If you need cuts deeper than 1.34 inches, or you need a larger work surface than 13 x 14 inches, you should not buy this saw.
Performance: What the Specs Deliver
How the bevel angle range handles straight and mitered edges
That matters when you need a finished corner or a transition piece, because the bevel setting covers both straight work and mitered edges in one setup.
Think of the bevel range like a hinge on a picture frame: it changes the angle of the edge, not the size of the frame itself.
Motor Speed
The 7 Inch Wet Tile Saw runs at 3,450 RPM, which gives you a blade speed suited to routine tile cutting jobs. For a practical buyer, that speed supports steady cutting on standard wall tile and floor tile without turning this saw into a deep-cut machine.
The induction motor is the other part of that picture, because it pairs with the 120V, 60Hz supply and the 4.8AMP draw. If you are planning a small jobsite or a garage setup, that electrical profile keeps the saw in the common corded-tool range, while the 16 mm blade thickness stays part of the cutting package you are working around.
How the water reservoir and reset switch support safe cutting
The 7 Inch Wet Tile Saw is a wet saw with a removable water reservoir and a reset safety switch, so it is set up for water-cooled cutting and a quick restart after a trip. That combination gives you the basic controls you want for tile work that needs slurry management and a simple safety reset.
Its galvanized worktable measures 13 x 14 inches, which gives you a defined support area for smaller tile pieces and narrow cuts. The removable reservoir also means cleanup and refilling stay separate from the cutting surface, while the 1.34-inch depth limits how thick a piece you can finish in one pass.
How the 7 Inch Wet Tile Saw Compares to Other Tile Saws
The 7-inch blade and 1.34 inches of cut depth give this saw a useful middle ground for tile work. The 0 to 45 Degrees bevel range also keeps angled cuts in reach.
- SKIL 3540-01 matches the 7-inch blade size, so the difference comes down to the rest of the listing rather than wheel diameter.
- RIDGID R4041S has an 8 in. blade and a 2-3/4 in cut depth, so it handles larger wheel and deeper-pass work than this saw.
- DEWALT DWC860W uses a 4-3/8-Inch blade, which puts it in a smaller saw class than this 7-inch model.
- Ironton lists the same 7in. blade size, so neither product has an edge on that dimension.
- MK 158252 MK-145 states a 4-1/2-Inch blade and a 1″ maximum cut depth, so this saw carries more reach in both of those figures.
- Among the five comparable listings, this model ranks 4th highest-rated, with a 3.6 average from 21 ratings. That is a thin sample.
If you need the deepest single-pass capacity in this group, the RIDGID R4041S is the better pick. Its 2-3/4 in cut depth is the clearest reason to choose it.
What the deciding spec costs here: Measured as price per unit of maximum cut depth, the reviewed product works out to $88.80 against a $209.86 median across the 9 other screened products that state the spec, and 2 of them deliver more of it per dollar. The cheapest screened product that beats its 1.34 inches / 34 mm is the RIDGID R4041S at $123.50 with 2-3/4 in, so more of the spec that decides this category starts $4.51 above this one.
You might also explore different tile saw alternatives if you need a different approach to your project.
From Delivery to First Use with This Tile Saw
What you need before the 120V saw will run
A 120V, 60Hz outlet is the one thing the 7 Inch Wet Tile Saw needs before it can do useful work.
- Unpack the saw and confirm the blade size is 7 inch before you mount a diamond blade.
- Fit a 7 inch diamond blade to the 7 inch arbor size so the wheel matches the mount.
- Set the cutting angle between 0 and 45 degrees for the cut you need.
- Fill the removable water reservoir before you start a wet cut.
- Connect the saw to 120V power at 60Hz and use an extension cord only if its rating matches that supply.
Getting the blade size or arbor size wrong costs time and money in a return or a replacement blade.
Warranty and support: what to confirm after delivery
Warranty cover differs by seller and country.
- Confirm the return window for the 120V saw, because the induction motor is not user-serviceable.
- Confirm whether the seller covers the reset safety switch, since that part affects safe restart behavior.
- Confirm support for the removable water reservoir, because a wet saw depends on that part for normal use.
- Confirm blade-fit support for a 7 inch diamond blade, because the blade size and arbor size both matter here.
The first thing to do on arrival is inspect the saw, blade mount, and water reservoir while a return is still possible.
The 7 Inch Wet Tile Saw: Remaining Questions
Is this worth buying at $118.99, or am I giving up too much for the price?
At around $118.99, the 7 Inch Wet Tile Saw keeps a 7-inch blade, 1.34 inches of cut depth, and 0 to 45 degrees of bevel travel. That combination covers basic wet tile work and angled cuts without moving into larger-saw capacity. The trade-off is that the 13 x 14 inch worktable and 120V, 4.8AMP setup point to a compact, lighter-duty role rather than a large-format one.
The 3.6 average from 21 buyer ratings is a thin sample, so it should stay a weak signal rather than a final verdict. The low price fits the spec set, but you are paying for a 7-inch wet saw, not for the deeper capacity of a 10-inch class saw.
Is the 7 Inch Wet Tile Saw Right for You?
Who the 7 Inch Wet Tile Saw suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who the 7 Inch Wet Tile Saw is for, and what it does well
Who this Tile Saw suits
- DIY homeowners installing kitchen or bathroom tile — the 7 inch blade, 1.34 inch max cut depth, and 0 to 45 degree bevel range suit common wall and floor tile cuts
- Tile setters doing small renovation jobs — the 120V, 4.8AMP setup and 3450 RPM induction motor fit light-duty site work and repeated straight or angled cuts
- Remodeling contractors working on trim and backsplash jobs — the removable water reservoir and wet-cut design help control dust while cutting ceramic or similar tile indoors
- Homeowners finishing a single room remodel — the 13 x 14 inch galvanized worktable gives enough support for typical tile pieces without needing a large saw
- Craft and mosaic hobbyists cutting tile pieces — the adjustable 0 to 45 degree angle setting and 7 inch blade make it practical for shaped edge work and small projects
- Vocational construction students learning tile cutting — the reset safety switch and simple 120V power make it suitable for basic training on wet saw operation
What this Tile Saw handles well
- Cutting ceramic wall tile — the 7 inch blade and 1.34 inch maximum cut depth handle standard tile sizes
- Making 45 degree bevel cuts on tile edges — the 0 to 45 degree adjustable cutting angles support angled trimming
- Dust-reduced wet cutting for indoor renovation — the removable water reservoir supports wet saw operation
- Small-format backsplash work — the 13 x 14 inch worktable fits compact tile pieces and repeated cuts
- Straight cuts on common tile stock — the 3450 RPM induction motor provides steady blade speed for routine cutting
- Basic jobsite or garage use on standard household power — the 120V, 60Hz, 4.8AMP electrical spec matches common outlets
What the 7 Inch Wet Tile Saw is the wrong choice for
- Cutting thick stone slabs or pavers — the 1.34 inch maximum cut depth is too shallow for heavy masonry pieces
- Large-format porcelain panels — the 7 inch blade and 13 x 14 inch worktable are too small for oversized sheets
- Heavy production tile shops running all day — the 4.8AMP motor and compact tabletop design are aimed at light-duty work, not continuous high-volume cutting
- Deep plunge cuts through thick materials — the 34 mm maximum cutting depth rules out deeper cuts
- Dry cutting without water management — the removable water reservoir means it is built for wet use, not dry-only operation
What to budget alongside the 7 Inch Wet Tile Saw, and what to skip
Accessories worth buying with this Tile Saw
- Tile blade — the saw needs a compatible 7 inch blade to cut tile
- Water — the removable reservoir needs water for wet cutting and dust control
- Extension cord — the 120V electric saw may need a suitable cord to reach the work area
- Eye protection — tile cutting throws chips and slurry, so the saw needs personal protective gear around it
- Replacement water reservoir insert — the removable reservoir implies a separate water-holding part that may need replacement if damaged
Accessories you can skip buying for this Tile Saw
- Extra-large cutting table — the included 13 x 14 inch worktable already covers this saw’s compact format
- High-voltage power adapter — the saw is already specified for 120V, so a voltage converter is unnecessary in standard household use
- Oversized 10 inch tile blade — the saw is built around a 7 inch blade, so a larger blade is not supported by the specs
- Dust extraction attachment — this is a wet saw with a water reservoir, so a separate dust-collection setup is usually unnecessary
Where to Buy This Tile Saw
The 7 Inch Wet Tile Saw sat at $118.99 in the listing data from November 2026; the price you see at checkout can differ.
Tile saws are sold by the retailers below – we do not track which of them has the 7 Inch Wet Tile Saw in stock, so check availability and the current price with the retailer before making a trip.
- Lowe’s (online and physical stores) — broad range of tile saws with physical-store pickup and returns
- Amazon (online only) — broad selection across brands and models
- Acme Tools (online only) — specialist power-tool retailer with knowledgeable staff and trade accounts
- Northern Tool (online and physical stores) — useful for contractor-oriented tool selection and store pickup
- Grainger (online and physical stores) — business and trade accounts for professional buying
- Toolbarn (online only) — specialist tool retailer with a focused selection
- Home Depot (online and physical stores) — broad range of tile saws and easy in-store returns
Final Verdict on the 7 Inch Wet Tile Saw
You should choose this 7 Inch Wet Tile Saw if your work stays within 1.34 inches of cut depth and you need 0 to 45 degrees of bevel travel. At around $118.99, it gives you a 7-inch blade, 120V power, and a wet-saw setup for tile work that needs water-cooled cutting.
The strongest number here is the 1.34-inch maximum cut depth. That depth matters because it defines how thick a piece you can cut in one pass, while the 0 to 45 Degrees bevel range keeps angled cuts on the table for corner work and finished edges.
Skip it if: you need deeper single-pass cuts than 1.34 inches, or you want a larger blade class for thicker tile and stone.