New Hardware is reader-supported: some links on this page are affiliate links, and as an Amazon Associate New Hardware earns from qualifying purchases at no extra cost to you. Learn more.
Our Top 3 Picks with Stand
The best tile saw with stand is the DEWALT D24000S Wet Tile Saw because its 10-Inch blade handles larger cuts, which suits buyers who want a stand-mounted wet saw.
Most Tile Saw options look identical on a listing page. These 3 are the ones that differ where it actually matters.
#1 – DEWALT D24000S Wet Tile Saw
Best for: you want a stand-included wet saw with 10-inch blade capacity and a 45-degree bevel for finished edge cuts.
Why the DEWALT D24000S Wet Tile Saw is our #1 pick
- Listed at $1063.19 in November 2026 – premium among those compared; the price moves, so check it
- 4.6 rating from 1,095 ratings
blade diameter: 10-Inch · maximum cut depth: 3 1/8
Against the other picks on blade diameter, pick #3 states 7″.
#2 – DEWALT D24000 Wet Tile Saw
Best for: you want a lower-priced stand-mounted DEWALT option with the same 10-inch blade size and 3 1/8-inch cut depth.
Why the DEWALT D24000 Wet Tile Saw is our #2 pick
- Listed at $159.99 in November 2026 – entry among those compared; the price moves, so check it
- 4.8 rating from 938 ratings
blade diameter: 10-Inch · maximum cut depth: 3 1/8
To put that blade diameter in context, pick #3 states 7″.
#3 – POWERTEC PRO TLS1003
Best for: you want a stand-mounted wet saw with a 7-inch blade, laser guide, and three bevel settings for ceramic work.
Why the POWERTEC PRO TLS1003 is our #3 pick
- Listed at $649.99 in November 2026 – mid-range among those compared; the price moves, so check it
- 5.0 rating from 1 ratings
blade diameter: 7″ · maximum cut depth: 2-1/4″
For comparison on blade diameter, pick #1 states 10-Inch and pick #2 states 10-Inch.
You can also find our full review of the WEN 71745 for a deeper look at its capabilities.
How New Hardware picked: we started from the 25 most-reviewed Tile Saw listings in our retail dataset, removed duplicates, accessories and off-category products, and 20 qualified. The picks on this page were selected from those 20 candidates against this topic’s requirements. The order of the picks reflects fit to this topic; each shows its rating and the number of ratings behind it, so you can weigh how much to trust it. Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
What We Recommend and Why
A stand-mounted saw only helps if the cut capacity matches the tile you plan to run through it, so the blade size matters before brand loyalty does. The DEWALT D24000S Wet Tile Saw answers that need with a 10-Inch blade and a 1.5 HP motor, which gives you the strongest capacity profile in this group.
Use the D24000S if you want the most complete stand bundle in the shortlist. Pick the DEWALT D24000 Wet Tile Saw if you want the same 10-Inch blade size at a much lower price, and pick the POWERTEC PRO TLS1003 if you want a corded saw with LED illumination and a laser guide. The shortlist runs from $159.99 to $1063.19, and the median price of the 5 products in our comparison is $293.93.
We screened 20 Tile Saws and kept 5 for this stand-focused comparison here at New Hardware, because this page needed options that actually address wet cutting with a stand attached. The comparison also includes a 2.0-rated Hoteche model and a 0.0-rated 9TRADING saw, so the price spread is not the only difference here.
Start by understanding the key factors in the buying guide.
Check the setup and warranty notes for installation and support details.
View the comparison table to see the specs side by side.
What This Page Concludes About Tile Saws with Stand
- Top pick: DEWALT D24000S Wet Tile Saw at $1063.19 (blade diameter: 10-Inch).
- Also picked: DEWALT D24000 Wet Tile Saw at $159.99; POWERTEC PRO TLS1003 at $649.99.
- We compared 5 Tile Saws, from $159.99 to $1063.19, median $293.93.
- Best buyer rating in the comparison: DEWALT D24000 Wet Tile Saw at 4.8/5 from 938 ratings.
- Not covered by these picks: Cut trim and small tile for a first bathroom or backsplash job – needs 4-3/8-inch blade, and none of the picks reaches it.
- Cheapest in the comparison that can keep cutting large-format tile without the blade wandering: DEWALT D24000 Wet Tile Saw at $159.99 (5hp).
Tile Saws with Stand Compared Side by Side
| Product | Price | Rating | blade diameter | motor power | water control and splash containment |
|---|---|---|---|---|---|
| DEWALT D24000S Wet Tile Saw | $1063.19 | 4.6 (1,095 ratings) | 10-Inch | 1.5 HP | side water tray |
| DEWALT D24000 Wet Tile Saw | $159.99 | 4.8 (938 ratings) | 10-Inch | 1 5 HP | side water tray |
| POWERTEC PRO TLS1003 | $649.99 | 5.0 (1 ratings) | 7″ | 1.5 HP | wrap-around splash guard |
| Hoteche HT-P805107A 8-Inch Wet Tile Saw | $169 | 2.0 (18 ratings) | 8-Inch | Not stated | — |
| 9TRADING Ceramic Tile Saw | $293.93 | 0.0 (0 ratings) | 7″ | 3/4 HP | — |
Prices are approximate and move frequently – check the current price before deciding. “Not stated” means the manufacturer listing does not give that figure – we do not estimate it.
Among our top picks, DEWALT D24000 Wet Tile Saw is the value leader because it pairs a lower price with 3 1/8 maximum cut depth, which matters for thicker tile cuts.
The Full Review of Each Pick with Stand
The 3 picks below are reviewed in the same order as the cards above.
DEWALT D24000S Wet Tile Saw
The D24000S belongs on a stand-focused page because it explicitly includes a stand and pairs that with a 10-inch blade, 3 1/8-inch maximum cut depth, and 45-degree bevel capacity. That combination suits home renovation work where you want one setup for straight cuts and angled edges.
What we like: The 1.5 HP motor gives this saw enough drive for the easier end of large-format cutting work, and the 28-inch plunge rip capacity gives you room for longer tile runs. The cutline indicator and stainless steel rollers are useful for keeping the cut path controlled, and the listing says accuracy stays within 1/32 inch over 18-inch cuts. At around $1,063, it sits at the high end of this group, but the included stand and 1095 buyer ratings make the package easy to place for a buyer who wants the most complete setup here.
Keep in mind: The 69-pound weight makes this more of a set-and-move saw than a grab-and-go tool. Its battery powered listing also leaves the power-source story unclear for a stand-mounted saw, so this fits a buyer who values the full feature set more than simple portability.
DEWALT D24000 Wet Tile Saw
The D24000 is the lower-cost DEWALT option with the same 10-inch blade size, 3 1/8-inch cut depth, and 45-degree bevel range as the higher-priced version. For a first-time buyer, that means the cutting envelope stays familiar while the price drops sharply.
What we like: At around $159.99, this is the budget-friendly way into a stand-included wet saw with DEWALT branding. The 1.5 HP motor gives the saw enough output for the easier end of the large-format tile job most home renovators ask of this class. It also lists the same 28-inch plunge rip capacity and the same 69-pound frame, so you are not giving up the basic work envelope that matters for a stand-mounted setup.
Keep in mind: The low price comes with a trade-off in buyer confidence, because this listing carries only 938 ratings. It still suits a beginner, but the heavier frame means you should plan for a fixed workspace rather than frequent carrying.
POWERTEC PRO TLS1003
The TLS1003 stands out for beginners because it adds a laser guide, a sliding table, and LED illumination, which help with setup and cut alignment. Its 7-inch blade, 2 1/4-inch cut depth, and 0, 22.5, and 45-degree bevel settings make it a smaller-capacity saw than the DEWALT picks, but the feature set is more adjustment-friendly.
What we like: The sliding tray moves the tile under the blade, which helps keep the workpiece stable during cuts. The dual bearing guide rollers, adjustable angle guide, and tilting head with stops give you several ways to control the cut path, and the 24-inch rip capacity is useful for typical ceramic work. It also lists corded electric power and 1.5 HP, so the saw has enough drive for the easier end of the large-format cutting range while staying in a more workshop-style format.
Keep in mind: The 1-ratings count leaves this with far less buyer feedback than the DEWALT options. Its 7-inch blade and 2 1/4-inch depth also make it the least suitable pick here if you need the deeper cut envelope associated with larger tile work.
Review the job requirements to ensure the tool meets your project needs.
See our top picks for a quick glance at the best options.
Find answers to common questions in the FAQ.
If you need a larger blade, see how the Ironton 7in. Wet Tile Saw performs.
What to Look For in a Tile Saw with Stand
Stand rigidity under load for long cuts
Look for a stand that comes with the saw and supports the full 69-pound frame without adding wobble during long cuts. DEWALT’s D24000S and D24000 both state a stand included, while the POWERTEC PRO TLS1003 also states a stand and adds a 66-pound body. The stand separates the field here because the tile saw with stand setup matters more than raw blade size when you want steady feed control. DEWALT’s 10-inch blade and 1.5 HP motor pair with a 45-degree bevel, so the saw can handle the common pro portable format that DEWALT’s D24000 is known for. The QEP 83200Q bridge saw is known for high-capacity straight and diagonal cuts in larger tile, and these picks stay in the portable, stand-mounted lane instead.
Table Travel For Long Rip Cuts
Use table travel to judge whether a stand mounted tile saw can keep a long tile moving in one pass. The D24000S states a 28-inch max rip capacity with plunge, and the D24000 states the same figure, so both suit longer straight cuts better than a compact saw with no stated rip length. POWERTEC’s TLS1003 states rip cuts up to 24 inches and diagonal cuts up to 18 inches, which is enough for many ceramic jobs but leaves less room for large-format tile. If you are cutting long porcelain tile, prioritize rip capacity over extra features, because porcelain tile changes saw requirements and the tile blade must match the material. Measure your longest tile before you buy; if it exceeds the stated rip capacity, the saw will not cover that cut in one pass.
Water Control And Splash Containment
Choose a wet tile saw with stand that states a pump, water pan, and splash guards if you want cleaner water control around the cut line. The D24000S lists a submersible pump, water pan, side water tray, and rear water tray, while the POWERTEC PRO TLS1003 adds a wrap-around splash guard, removable nozzles, and a baffled inner-guard system. That combination matters because wet cutting keeps slurry moving away from the blade, and poor containment makes cleanup harder around the stand. The D24000S also states stainless steel rollers, which support steadier feed along the cutting cart. The category’s wet saw workflow is the opposite of a dry cutter, so the water-handling parts are not decoration here.
Blade Depth For Thick Tile
Pick blade depth around the tile thickness you need to cut, because maximum cut depth is the figure that decides whether a saw can pass through thicker material in one pass. The D24000S and D24000 both state 3 1/8 inches of depth, while the POWERTEC PRO TLS1003 states 2-1/4 inches. That makes the DEWALT pair the better match for thicker tile and deeper cuts, especially when you are working with porcelain tile and want more margin under the blade. The 10-inch blade size on the DEWALT models also puts them in the common full-size tile saw class, while the 7-inch POWERTEC is the smaller option here. If you need the deepest cut, the DEWALT pair is the clearest fit from the data shown.
Folding Setup And Transport Weight
Keep folding setup and transport weight in mind if you need to move the saw between jobs or store it in a vehicle. The D24000S and D24000 each state 69 pounds, while the POWERTEC PRO TLS1003 states 66 pounds and a compact aluminum table. That 3-pound gap is modest, so the bigger difference is the compact frame and transport-oriented details on the POWERTEC. The D24000 also states a compact saw frame for easy transport and storage in a vehicle, which helps if you need a portable tile saw stand combo rather than a fixed shop setup. If you move the saw often, weigh the full unit plus stand before you choose, because the stand is part of the carry burden.
What Each Job Calls For vs What These Picks State
Match the job you actually need done to the figure it calls for, then check which picks state that figure or more. Where none do, the row says so.
| What you want to do | The figure it calls for | Picks at or above it |
|---|---|---|
| Handle thicker tile or stone without moving to a full-size saw | 7-inch blade | TLS1003 clears it; both D24000 models also clear it. |
| Cut trim and small tile for a first bathroom or backsplash job | 4-3/8-inch blade | None of these picks; a compact 4-3/8-inch tile saw or a small wet saw class would fit better. |
| Make angled edge cuts for corners and finished transitions | 45-degree bevel angle | D24000S, D24000, and TLS1003 all clear it. |
These figures are the levels this category is generally held to, not manufacturer claims. A pick at or above a figure states that number; how it reaches it and the rest of your setup still decide the job, so check them against your own workload before buying.
Who Buys Tile Saws, and What It Really Costs
Who buys a Tile Saw, and what each one needs
- Tile installers — need a wet saw with stand and enough cut depth for common floor and wall tile, plus a 45-degree bevel for finished corners
- Remodeling contractors — need a 120V corded saw for jobsite power and a stand that supports repeat cuts without constant bench setup
- Stone countertop fabricators — need a larger-capacity saw setup that handles thicker stone and reduces blade deflection on long cuts
- DIY homeowners doing bathroom remodels — need a wet cutter for cleaner tile work and a stand so the saw sits at a workable height
- Flooring crews — need a saw with enough rip capacity for large-format tile so pieces do not need to be broken into extra passes
- Architecture students — need a saw setup that can show how bridge saw vs sliding-table saw workflows change tile handling and cut layout
What a Tile Saw really costs, and where to buy one
What to budget for on top of the Tile Saw
- Tile blade — needed because the saw body alone does not cut tile
- Water supply setup — needed for wet cutting and slurry control
- Extension cord — needed when the jobsite outlet is not close enough
- Safety glasses and hearing protection — needed for flying chips and noise
- Replacement water tray or pump parts — needed because wet saws use water circulation parts that wear out
What you can leave out of the budget
- Dry-cut dust shroud — unnecessary when the saw is used as a wet saw
- Extra masonry drill bits — unnecessary because they are for drilling, not sawing
- Angle grinder cutting discs — unnecessary if the saw is doing the tile cuts
- Saw horses — unnecessary when the included stand already supports the saw
Where this kind of product is normally sold
- Home improvement chains — usually offer return windows, in-store pickup, and easier warranty handoff for bulky tools
- Tool specialty retailers — often bundle blades or stands and give clearer spec comparisons for cut depth and bevel range
- Online marketplaces — usually give broad price spread and user reviews, but warranty handling depends on the seller
- Contractor supply stores — tend to stock jobsite-oriented saws and parts support, with less hand-holding but faster replacement sourcing
Explore the detailed reviews for an in-depth look at every model.
Learn about the limitations and inclusions in the scope.
Make sure to verify the safety standards and certifications before choosing your specific model.
What It Takes to Run One, and What to Verify
What these wet saws need before they work
All three picks need a wet-saw setup with water delivery, because the pump keeps the blade cooled and dust controlled while you cut ceramic or tile.
- TLS1003 states corded electric, so you need outlet access or an extension cord that matches its plug and voltage.
- D24000S includes a stand, and D24000 also states stand included. TLS1003 also states stand included, so none of these three needs a separate stand purchase.
- TLS1003 states a 7″ diamond blade. If you need a replacement blade, match the 7″ size and the wet-cutting style.
- D24000S and D24000 both state a 10-Inch blade diameter. Their blade size is different from TLS1003, so replacement blades must match the saw that receives them.
What to verify when the tile saw with stand arrives
Cover differs by seller and country, so verify the parts that matter for a stand-mounted wet saw before your return window closes.
- Confirm the stand is in the carton. D24000S, D24000, and TLS1003 all state stand included, and a missing stand changes the whole setup.
- Confirm the water pump is present. A wet saw depends on that pump for blade cooling and dust control, and a missing pump stops normal use.
- Confirm the blade size and arbor size. D24000S and D24000 state a 10-Inch blade and 5/8 arbor size, while TLS1003 states a 7″ blade and 5/8″ arbor size.
- Confirm the fence alignment parts move and lock cleanly. Accurate straight cuts depend on that alignment, and the 24″ rip capacity on TLS1003 gives little room for a crooked setup.
On the day it arrives, lay out the stand, pump, blade, and guides before the return window closes.
Tile Saws with Stand: The Questions This Choice Raises
How important is water containment and splash control when choosing a tile saw with stand?
Water containment and splash control matter because wet saw slurry affects cleanup and indoor use. The DEWALT D24000S includes a water pan, side water tray, rear water tray, and a submersible pump, while the POWERTEC PRO TLS1003 states a wrap-around splash guard, removable nozzles, and a baffled inner-guard system.
Do I need a special outlet, extension cord, or water source to use a tile saw with stand safely?
Yes, the outlet and water source matter because these saws state different power setups.
Which stand mounted tile saw gives the most blade size?
The DEWALT D24000 also states 10 inches, while the POWERTEC PRO TLS1003 uses a 7-inch blade, which suits smaller cutting setups.
Which tile saw with stand gives the most angle options?
The tile saw with stand that gives the most angle options is the POWERTEC PRO TLS1003, because it states bevel/miter angles of 0, 22.5, and 45 degrees. The DEWALT picks both state a 45-degree bevel range, so the POWERTEC gives you more set positions for angled cuts.
Use the audience checklist to find the perfect match for your skill level.
Who Should Skip These Tile Saws
If your work is a 4-3/8-inch blade job, these three picks are the wrong tool. That blade class is the smallest common saw size for trim cuts and light-duty masonry, and none of these options states that size.
You should move to a compact tile saw built for trim work, or to a guide aimed at smaller jobs: best portable tile saw for small jobs. If you are asking, “Will these handle a first bathroom backsplash?” the answer is no; the stated blade sizes here are 10-inch, 10-inch, and 7-inch, and that is a different class of saw.