DEWALT DWC860W Tile Saw Review: Bevels to 45 Degrees for Precise Tile Cuts

Where the DWC860W Fits

DEWALT DWC860W Tile Saw cuts with a 4-3/8-Inch blade for buyers who need a compact corded masonry saw.

A 45-degree bevel lets a tile saw handle mitered edges, which matters when your cuts need to finish cleanly at corners.

DEWALT DWC860W pairs that angled-cut range with a 4-3/8″ diamond blade and a 13,000 rpm max no-load speed.

We screened 20 Tile Saws and selected 14 for full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 1,265 buyer ratings, the 2nd most of the 20 screened. The DWC860W suits you if you need a corded electric masonry saw that cuts ceramics and stone materials up to 1 3/8″ deep wet or dry.

The Short Answer on the DWC860W

Best for: you need a corded masonry saw with a 4-3/8-inch blade and 45-degree bevel cuts for tile, stone, or concrete work.

This is a sensible buy for that use case at around $132.99.

• Pro: The 4-3/8-inch diamond blade suits compact cutting jobs.
• Pro: The 1 3/8-inch maximum cut depth lets it handle thin masonry and tile in one pass.
• Pro: A 45-degree bevel gives you angled cuts for corners and transitions.
• Con: The corded electric power source limits you to outlets, so it is not the right choice for remote jobs without power.

Don’t buy this if: you need a 7-inch tile saw for thicker stone or large-format cuts.

Price assessment: $132.99 is fair for a corded 4-3/8-inch saw with bevel capability and a 10.8 amp motor.

The Specifications That Matter for this Tile Saw

Bevel angle range most separates the DWC860W. It measures how far the saw head or table can tilt for angled cuts.

Before You Buy: Tile Saw Checklist

If your material is deeper than that, you will need a different saw rather than a workaround.

• ☐ Confirm your thickest material fits within the 1 3/8-inch cut depth — otherwise this saw leaves part of the tile uncut, and you will need to return it or buy a deeper-cut model.
• ☐ Check that a 4-3/8-inch blade is enough for your cuts — if your job needs more reach, the saw will stop short and you will have to replace it with a larger-blade saw.
• ☐ Measure your miter needs against the 45-degree bevel range — if you need a tighter or wider angle, you will be stuck reworking corners or choosing another saw.
• ☐ Budget for a corded setup — the power source is corded electric, so you need outlet access and a corded workflow or you will be forced to change your setup.
• ☐ Check whether your cleanup plan can handle wet or dry cutting slurry — the saw cuts ceramics and stone up to 1 3/8 inches deep wet or dry, so poor water control can leave you with a mess to clean up.

Do not buy this saw if your thickest cut, your bevel work, or your corded setup does not match these figures.

Consider if the DWC860W fits your workspace requirements before making your final purchase.

Performance: What the Specs Deliver

What this Tile Saw’s motor power delivers

Will it handle the cut load you need? DWC860W gives you a 10.8 amp motor and 1,300 watts, so you have enough drive for granite, porcelain, concrete, and other stone materials. For an upgrader, that matters more than a generic power claim, because motor output is what supports sustained cutting through harder material, not blade size or bevel range.

The corded electric supply keeps that power tied to an outlet, which suits bench work and planned cuts better than remote jobsite moves. At 6.6 lbs, the saw stays relatively light for a masonry saw, so the power package does not come with a heavy carry penalty. If you need portability plus outlet access, this combination is easier to manage than a larger corded saw.

How the blade and speed handle deeper cuts

Will it actually cut 1 3/8″ tile or stone in one pass, or do you need to flip it? DWC860W is built around a 4-3/8″ diamond blade and a 13,000 rpm no-load speed, and it cuts ceramics and stone materials up to 1 3/8″ deep wet or dry. That means the listed depth is the one-pass limit for the material thickness you are buying it for.

Wet or dry cutting both fit this saw, which gives you flexibility on dust control and edge quality depending on the material. For porcelain and granite, the wet setup is the safer choice from the listing alone, because the saw is explicitly rated for wet or dry use and names those harder materials in its cutting list. The 12′ water line supports wet work without moving the saw constantly for every cut.

How bevel cutting at 45 degrees helps

Bevel cutting is available here at 45 degrees, so you can make angled edge cuts for corners and finished transitions. That angle is enough for the common mitered edge work tile saw buyers use on trim pieces and exposed edges, and it is the deciding figure for this kind of cut.

The bevel range does not change the saw’s 1 3/8″ depth rating, so angled work still has the same thickness limit as straight cuts. If your project depends on corner joints or visible edges, this 45-degree capability lets you handle those cuts without moving to a different tool class. If you only need straight cuts, the bevel feature is extra range rather than the reason to buy it.

How the DWC860W Compares to Other Tile Saws

DWC860W’s clearest edge is the combination of a 4-3/8-inch blade and a $132.99 price. That smaller blade size keeps it in the compact class, while the price sits below several of the larger options here.

• Against the MK 158252 MK-145, DWC860W is $4.96 cheaper. The MK model lists 4-1/2-inch blade diameter, so it gives you a slightly larger wheel for a small price bump.
• Against the RIDGID R4041S, DWC860W has the smaller blade diameter. It lists 4-3/8 inches, while the RIDGID model lists 8 inches.
• Against the 7 Inch Wet Tile Saw, DWC860W is lighter at 6.6 lbs.
• Against the DEWALT D24000, DWC860W is $27 cheaper. The D24000 is the larger 10-inch wet tile saw in this group, so that extra size comes with a higher price.

If you want the 10-inch format for larger tile, pick the DEWALT D24000 instead. If your work is better served by a lighter 4-3/8-inch saw, DWC860W is the more compact choice.

You may also want to see our full review of the D24000S for a different power option.

Compare these specs against our complete D24000 review to see how it stacks up.

From Delivery to First Use with This Tile Saw

What the DWC860W needs before first use

Corded electric power is the one thing this saw needs before it does anything useful.

1. Unpack the DWC860W and confirm the 4-3/8″ diamond blade is present before you start.
2. Fit a diamond blade that matches the 4.5 Inches arbor size, because the blade and arbor have to mate cleanly.
3. Connect the 12′ water line if you are setting up a wet cut, or leave it out for dry cutting.
4. Plug the saw into corded electric power and place the work so the 45-degree bevel setting can be used without obstruction.
5. Set the cut path for material up to 1 3/8″ deep, then make the first pass on ceramic or stone.

Warranty and support: what to check on arrival

Warranty cover differs by seller and country.

• Confirm the blade arrives with the box, because the saw uses a 4-3/8″ diamond blade and a missing one stops first use.
• Confirm the arbor fit for any replacement blade, because the saw’s 4.5 Inches arbor size limits what will mount correctly.
• Confirm the cord length and outlet plan, because the saw is corded electric and cannot run without a live power source.
• Confirm the water-line parts are included if you need wet cutting, because the 12′ water line supports that setup.

On the day it arrives, open the box and verify the blade, arbor fit, and water line before the return window closes.

The DWC860W: Remaining Questions

Can the DEWALT DWC860W cut tile and stone?

Yes, the DWC860W cuts ceramics and stone materials up to 1 3/8″ deep, and the listing also names granite, porcelain, and concrete. That depth is the main limit to watch. If your material is thicker, this saw will not cover it in one pass.

Does the DEWALT DWC860W run on corded electric power?

Yes, the DWC860W uses corded electric power and lists a 10.8 amp motor with 1,300 watts. That makes outlet access part of the setup. The corded design suits fixed work better than remote cutting.

How much does the DEWALT DWC860W weigh?

The DWC860W weighs 6.6 lbs. That is light for a masonry saw, which can matter if you move it between cuts or carry it up stairs. The listing does not state a carrying case or other transport aid.

Is the DEWALT DWC860W good for angled cuts?

Yes, the DWC860W bevels to 45 degrees. That angle is the key figure for mitered edge cuts and finished corners. If your work needs a different tilt range, this listing does not state one.

What blade size does the DEWALT DWC860W use?

The DWC860W uses a 4-3/8″ diamond blade, and its cutting diameter is listed as 4.5 inches. That size points to a compact saw class rather than a full-size tile saw. It is the number to compare against the blade size you already use.

Is the DEWALT DWC860W worth around $132.99?

For around $132.99, the DWC860W gives you a 4-3/8″ blade, 45 degrees of bevel capacity, and a 1 3/8″ cut depth. That combination suits smaller tile and masonry jobs more than large-format cutting. The 4.2 average from 1,265 buyer ratings adds context, but the specs do the real work here.

New users should view tile saw terms and specs explained to understand the technical data.

Is the DWC860W Right for You?

Who the DWC860W suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Tile Saw

The DWC860W sat at $132.99 in the listing data from November 2026; the price you see at checkout can differ.

Tile saws are sold by the retailers below – we do not track which of them has the DWC860W in stock, so check availability and the current price with the retailer before making a trip.

• Lowe’s (online and physical stores) — broad range of tile saws with physical-store pickup and returns
• Amazon (online only) — broad selection across brands and models
• Acme Tools (online only) — specialist power-tool retailer with knowledgeable staff and trade accounts
• Northern Tool (online and physical stores) — useful for contractor-oriented tool selection and store pickup
• Grainger (online and physical stores) — business and trade accounts for professional buying
• Toolbarn (online only) — specialist tool retailer with a focused selection
• Home Depot (online and physical stores) — broad range of tile saws and easy in-store returns

Final Verdict on the DWC860W

You need a corded masonry saw with a 4-3/8-inch blade, 1 3/8-inch cut depth, and 45-degree bevels. The DWC860W fits that need at around $132.99.

Its 13,000 rpm no-load speed is the strongest number here. That speed matters for the cuts this saw is sized to make, and the 10.8 amp motor gives you the power source behind it.

Skip it if: you need a larger blade class for deeper tile work, or you want a saw type other than a masonry saw.