Will the 3550-02 fit the tile sizes and cutting angles I need?

If your setup needs larger tile support or a different angle range, you need another saw type. We picked this model for a full review because its listed size limits and angle settings are the deciding factors here.

3550-02 cutting angles, tile size support, and blade limits

The 3550-02 uses a 7-inch blade and cuts bevels at 0, 22.5, and 45 degrees. Its sliding side extension supports tiles up to 18 x 18-inch, and the Hydro lock water containment system helps keep slurry controlled during wet cutting. The blade type is not stated beyond High Speed Steel, so porcelain tile and other hard materials may need you to match your own wet saw blade to the tile hardness. The maximum thickness for a clean edge is not stated.

You can see how the 3550-02 stacks up against rivals in our full Skil 3550-02 comparison.

What to Check Before Buying the 3550-02

• Measure your largest tile. The sliding side extension supports tiles up to 18 x 18-inch.
• Check your angle needs. This saw makes 0, 22.5, and 45-degree bevel cuts.
• Confirm your cut depth needs. The listing does not state a maximum thickness for a clean edge.
• Check whether your tile needs a porcelain tile blade. Porcelain tile is a dense ceramic tile, and the listing only names High Speed Steel for the blade material.
• Look at your smallest piece size. A fence can only hold what your tile shape and width allow, and the minimum width is not stated.
• Decide whether you need a sliding table or fixed-head layout.

Where the 3550-02 Sits Among Wet Tile Saw Options

The 3550-02 sits in the portable 7-inch wet saw group, not the larger 10-inch class that handles bigger tile and deeper cuts. If you need a miter cut beyond 45 degrees, or you want a saw for larger-format tile without working around a compact table, you should look at other tile saw types instead. The 22.05-pound weight and corded electric power source also point to a saw meant for a fixed work area, not a highly mobile setup.

For more details on output, see how the Skil 3550-02 performs in our data breakdown.

Choose this saw if you want a compact wet tile saw with 0, 22.5, and 45-degree bevel cuts, tile support up to 18 x 18-inch, and a water containment system. Skip it if your tile is larger, your angle needs are wider, or you need a stated cut depth for thick material.

If you need a mobile setup, browse the best tile saw with stand options available.

Reviewed by the New Hardware editorial team. New Hardware writes these guides from the 25 most-reviewed Tile Saw listings in our retail dataset, not from manufacturer copy.