Will the JET 9-inch by 16-inch HBS-916 fit a 115V shop setup with enough power and space?

We selected it for this review because the 115 Volts input and 1.5 HP rating are the key fit checks here. A standard 15A circuit can still be a concern if the motor’s actual amperage draw is high, and the footprint includes the base plus the blade guard clearance. The saw is a horizontal metal cutter, so feeding long stock also depends on your room, not just the voltage.

For a deeper dive into the technical specifications, see our full review of the HBS-916.

HBS-916 power, cutting setup, and space requirements

The HBS-916 runs on corded 115 Volts and uses 1.5 horsepower, which is the core match for a light shop circuit. Its 235 FPM blade speed and 119.5-inch blade length describe the cutting setup, while the 45-degree cutting angle and quick-release vise show how it handles angled work. The coolant system, hydraulic downfeed, and automatic shut-off add shop control, but the actual amperage draw is not stated, so a breaker check still matters. Grounding also matters if your plug type needs a dedicated ground wire, and the maximum feed length is a space question you have to measure in your own shop.

If you have specific questions about the HBS-916, view the HBS-916 FAQ section.

What to Check Before Buying the HBS-916

• Measure your circuit breaker capacity and confirm the saw’s actual amperage draw will not overload a 15A household circuit.
• Check the footprint with the base and the protruding blade guard together, not just the frame size.
• Verify grounding for your plug type and make sure your shop wiring supports it safely.
• Measure the path for long stock so material can feed through without hitting the floor or a wall.
• Confirm you have room for a 689-pound machine before you plan the installation.
• Check whether your work usually needs a 45-degree miter, since the vise swivels to that angle.

Where the HBS-916 Fits Among Horizontal Band Saws

The HBS-916 suits buyers who want 115V operation, hydraulic downfeed, and a quick-release vise in one heavy shop saw. It is a better fit for a fixed indoor setup than for a portable or space-tight shop. If you need more electrical headroom, or if your work depends on heavier stock and a stronger circuit, you should keep looking at larger power and supply options. A 1.5 HP saw can handle mixed steel and aluminum only at the easier end of the 1.5 to 3 HP range, so buyers with tougher material mixes should compare upward.

To see how it ranks against industrial options, see the best horizontal band saw for a machine shop.

When the HBS-916 suits a 115V shop layout

Choose the HBS-916 if your shop has 115V power, enough floor space, and you want a heavy, corded horizontal bandsaw for indoor metal cutting. Skip it if your circuit is marginal or your layout cannot handle a 689-pound machine and long-feed clearance. The 5.0 average from 5 buyers is too small to settle quality either way, so the fit question here is space and power, not rating.

If your budget is limited, explore the best horizontal band saw for a small shop under $7000.

Reviewed by the New Hardware editorial team. New Hardware writes these guides from the 13 most-reviewed Horizontal Band Saw listings in our retail dataset, not from manufacturer copy.