New Hardware is reader-supported: some links on this page are affiliate links, and as an Amazon Associate New Hardware earns from qualifying purchases at no extra cost to you. Learn more.
WEN 71745 4.5-Inch Wet Tile Saw
WEN 71745 bevels to 45 degrees for angled tile cuts if you need a compact saw for stone, porcelain, or ceramic.
4.5-Inch blade diameter
- blade diameter
- 4.5-Inch
- maximum cut depth
- 3/4 inches
- bevel angle range
- 45 degrees
$21 under the category median
- This Tile Saw
- $169.99
- Median of the 20 Tile Saws we screened
- $191.22
- Range
- $104.99 to $1131.62
- Cheaper than this one
- 8 of those 20
3.1/5 from 11 buyers
- Average buyer rating
- 3.1 out of 5
- Ratings behind it
- 11
- What that supports
- A thin sample – a weak signal that could still move
- Where it comes from
- The product listing, read 5 November 2026
1 deciding spec not stated
- motor power
- Not stated in the listing – confirm with the seller before ordering
Where the WEN 71745 Fits
WEN 71745 Wet Tile Saw cuts 3/4 inches for you if you need a compact saw for thin tile work.
A 45-degree bevel lets you make angled edge cuts, which matters when a corner or trim joint needs a finished line.
WEN 71745 is the compact option here, and its 4.1-amp motor drives a 4-1/2-inch diamond blade for tile work. The saw also bevels the table to 45 degrees.
We screened 20 Tile Saws and this is one of 14 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 11 buyer ratings, the 11th most of the 20 screened. The rating is 3.1 from 11 buyer ratings. This review is for you if you want a wet saw with angled-cut capability and a low entry price around $169.99.
How New Hardware picked: we started from the 25 most-reviewed Tile Saw listings in our retail dataset, removed duplicates, accessories and off-category products, and 20 qualified. This product is one of 14 from that pool chosen for a full review. Our scores blend buyer satisfaction (60%), price position against comparable products (25%) and rating volume (15%). Specifications come from manufacturer listings and ratings from verified Amazon buyer reviews (data checked November 2026).
The Short Answer on the WEN 71745
Best for: you need a compact wet tile saw for stone, porcelain, or ceramic tiles up to 3/4 inches thick.
WEN 71745 is the better fit at around $169.99 if you want a 4-1/2-inch wet saw with a 45-degree bevel and a 4.1-amp motor.
- Pro: The 4-1/2-inch diamond blade handles smaller tile work without moving into a larger saw class.
- Pro: The 45-degree bevel supports angled cuts for finished edges and corners.
- Pro: The internal water reservoir helps keep the wet-cut workflow self-contained.
- Con: The 3/4-inch maximum cut depth rules out thicker material in one pass.
- Con: The 4.1-amp motor and 5,000 rpm ceiling leave less headroom for buyers who need a larger tile saw for heavier cuts.
Don’t buy this if: you need a 7-inch or 10-inch tile saw for larger-format tile or deeper cut capacity.
Price assessment: $169.99 is a low-price option for a compact wet tile saw with bevel cutting.
New Hardware score: 5.6/10 (data-driven – see “How we picked” above)
New users looking for a manageable entry point should explore the best wet tile saw for beginners.
The Specifications That Matter for this Tile Saw
| Spec name | Value |
|---|---|
| Blade diameter | 4.5-Inch |
| Maximum cut depth | 3/4 inches |
| Bevel angle range | 45 degrees |
| Arbor size | 5/8 inch |
| Power source | battery powered |
| Saw type | wet saw |
| Motor power | 4.1-amp motor |
| Blade material | Ceramic |
| Rotational speed | up to 5000 times per minute |
| Water reservoir | Internal water reservoir |
Bevel angle range separates this WEN 71745 most clearly. It measures how far the saw head or table can tilt for angled cuts.
Where this sits in the buyer data: Among the 16 products screened for this category, this one’s 3.1 rating places it #15, on 11 ratings – below the 64-rating median of that group, so treat the average as less settled than its comparables. On price it undercuts 11 of them.
Before You Buy: Tile Saw Checklist
The first thing to check is whether your tile work stays within the 4-1/2-inch blade and the 3/4-inch cut depth. If your material is thicker, you will need a different saw; if it fits, this WEN can handle stone, porcelain, and ceramic tiles at that thickness.
- ☐ Confirm your tile thickness — 3/4 inches; if your stock is thicker, this saw leaves you with an incomplete cut and a return.
- ☐ Check whether you need bevel cuts — 45 degrees; if your layout needs a steeper angle, you will have to buy another saw for the edge work.
- ☐ Budget for battery-powered use — Power Source: Battery Powered; if you wanted corded operation, this listing does not give it, so you may end up with the wrong power setup.
- ☐ Check the water-management setup — Internal water reservoir; if you need stronger slurry control, poor containment can leave cleanup messier and the work area less safe.
- ☐ Confirm the cut type you need — Angled cuts for tiles up to 1/2 inch thick; if your trim pieces are thicker than that, you will have to rework the plan or replace the saw.
Do not buy this saw if your tile is thicker than 3/4 inches or your bevel work needs more than 45 degrees.
Performance: What the Specs Deliver
How the motor and blade suit light tile work
WEN 71745 pairs a 4.1-amp motor with a 4-1/2-inch diamond blade. That combination suits light tile work, because the blade size and motor output are set for small-format cuts rather than heavy stock removal. The 5/8-inch arbor is the mounting size for the blade, so you are dealing with a common fitment detail rather than a special accessory standard.
The blade turns up to 5,000 times per minute, which supports faster passes through stone, porcelain, and ceramic tile. If you are choosing between speed and cut size, which matters more for your job? The 4-1/2-inch blade and 3/4-inch cut depth keep this saw in the compact class, so it favors trim work and thinner material over larger tile.
What cutting capacity means for tile thickness
WEN 71745 cuts stone, porcelain, and ceramic tiles up to 3/4 inches thick. That depth is the key limit for your material choice, because it tells you the thickest stock this saw can handle in one pass. The saw type is wet saw, so the internal water reservoir supports water-cooled cutting rather than a dry-cut workflow.
The angled-cut limit is 45 degrees, which gives you mitered edges for corners and finished transitions. It also lists angled cuts for tiles up to 1/2 inch thick, so you need thinner material when the cut itself is tilted. That trade-off matters if your layout calls for beveled edges on thicker tile.
How setup and control help guide repeat cuts
WEN 71745 includes an adjustable fence, a sliding miter gauge, and an onboard cord storage. Those parts help you guide repeat cuts and keep the cord managed between setups. The carrying handle makes the saw easier to move between work areas, which matters on small jobs where the saw changes position often.
The battery-powered listing gives you cordless placement freedom, while the silver housing and compact blade size keep the footprint modest. The table bevels up to 45 degrees, so you can set angle cuts without moving to a different saw class. For buyers working from a small bench, that combination favors portability over large-capacity cutting.
If your project requires high-density materials, see how to find the best tile saw for porcelain tile.
How the WEN 71745 Compares to Other Tile Saws
A 4-1/2-inch blade keeps this saw in the compact class, and its $169.99 price sits below several larger wet tile saws in the comparison set. The 3/4-inch cut depth is the tighter limit here, so thicker tile pushes you toward a bigger saw.
- Against the Hoteche HT-P805107A 8-Inch Wet Tile Saw, the blade size is the clearer trade-off: 4-1/2 inches here versus 8 inches there.
- Against the DEWALT D24000 Wet Tile Saw, this model is cheaper by $10, but the DEWALT’s 3 1/8-inch maximum cut depth gives it much more headroom for thicker material.
- Against the WEN 71707 Wet Tile Saw, the 45-degree bevel range matches, so the difference comes down to size and capacity rather than angled-cut capability.
- Against the Leegol Electric Wet Tile Saw, this saw’s 4.1-amp motor is the only motor figure stated here; Leegol does not state one in the comparison data.
- Against the MK 158252 MK-145 4-1/2-Inch Wet Tile Saw, the blade diameter ties at 4-1/2 inches, so neither one has an edge on wheel size.
If you want the most room for thicker cuts, the DEWALT D24000 is the better pick here. Its 3 1/8-inch depth spec gives it a clear advantage over this saw’s 3/4-inch limit.
What the deciding spec costs here: Measured as price per unit of maximum cut depth, the reviewed product works out to $226.65 against a $152.03 median across the 9 other screened products that state the spec, and 6 of them deliver more of it per dollar. The cheapest screened product that beats its 3/4 inches is the 7 Inch Wet Tile Saw at $118.99 with 1.34 inches / 34 mm, which is $51 less than this one for more of the spec that decides this category.
For a deeper dive into the power and performance of the RIDGID model, see our full R4041S spec breakdown.
From Delivery to First Use with This Tile Saw
Getting the WEN 71745 ready to cut
The WEN 71745 needs a charged battery-powered source before it does anything useful.
- Unpack the saw and identify the 4-1/2-inch diamond blade and the 5/8 inch arbor size.
- Fit a diamond blade that matches the 5/8 inch arbor. Tight fit. Wrong size will not work.
- Fill the internal water reservoir before you start a wet cut.
- Set the table bevel to 45 degrees when you need angled cuts for tile up to 1/2 inch thick.
- Use the adjustable fence and sliding miter gauge to guide stone, porcelain, or ceramic tile up to 3/4 inches thick.
Warranty and support checks for this Tile Saw
Coverage varies by seller and country.
- Confirm the return window before you cut, because the 4.1-amp motor and water system are not user-serviceable in this section.
- Confirm that the seller covers the 4-1/2-inch diamond blade, because blade replacement is tied to the 5/8 inch arbor fit.
- Confirm whether a battery-powered saw is covered with the same terms as the rest of the order, because the power source is the part that stops the saw from running.
- Confirm support for the internal water reservoir and onboard cord storage, because both are part of the saw’s setup and not separate add-ons.
On arrival, inspect the blade fit and the reservoir before the return window closes.
The WEN 71745: Remaining Questions
Can the WEN 71745 cut porcelain tile?
Yes, the WEN 71745 cuts porcelain tile, and the listing also names stone and ceramic tile. Its 4-1/2-inch diamond blade and 3/4-inch cut depth define the material range and thickness range in the data. That suits small tile jobs, not thicker stock.
Does the WEN 71745 run on battery power?
Yes, the WEN 71745 is listed as battery powered. The same listing also gives a 4.1-amp motor, so the power source and motor spec are both stated. That matters if you want a saw without a cord in the way.
How deep can the WEN 71745 cut?
The WEN 71745 cuts up to 3/4 inches thick. That depth is enough for many tile jobs, but it does not tell you cut length or motor strength. The angled-cuts note adds a separate limit: tiles up to 1/2 inch thick for angled cuts.
Is the WEN 71745 worth around $170?
That depends on whether you need a compact wet tile saw with a 4-1/2-inch blade and 45-degree beveling. Around $169.99 puts it in budget territory, but the 3.1 average from 11 ratings is a thin signal, not a settled verdict. If you want a low-cost saw for smaller tile work, the spec set matches that use better than heavy-duty cutting.
Is the WEN 71745 Right for You?
Who the WEN 71745 suits and the jobs it is the wrong choice for, listed below with the reason for each.
Who the WEN 71745 is for, and what it does well
Who this Tile Saw suits
- DIY homeowners installing kitchen or bathroom tile — the 4-1/2-inch blade, 3/4-inch cut depth, and 45-degree beveling suit small renovation cuts
- Ceramic tile installers doing trim work — the adjustable fence and sliding miter gauge help make repeatable straight and angled cuts
- Porcelain tile hobbyists — the 5000 RPM motor and diamond blade are suited to cutting hard tile materials
- Weekend remodelers with limited workshop space — the carrying handle and onboard cord storage make it easier to move and store
- Craftspeople cutting small stone accents — the wet cutting setup and 3/4-inch thickness limit fit decorative tile and stone pieces
What this Tile Saw handles well
- Cutting bathroom wall tile — the 4-1/2-inch diamond blade and 3/4-inch max cut depth handle standard tile sizes
- Making 45-degree edge cuts for corners — the table bevels up to 45 degrees
- Trimming porcelain floor tile — the 4.1-amp motor and 5000 RPM blade speed support hard tile cutting
- Cutting small stone mosaic pieces — the wet saw setup and diamond blade are suited to stone and ceramic surfaces
- Repeated straight cuts for backsplash installation — the adjustable fence helps keep cuts consistent
- Angled cuts on tiles up to 1/2 inch thick — the sliding miter gauge supports angled tile work within that limit
What this Tile Saw is the wrong choice for
- Cutting thick pavers or heavy stone slabs — the 3/4-inch maximum cut depth rules out thicker material
- Dry cutting in finished indoor rooms — the internal water reservoir means it is designed for wet cutting, not dry use
- Heavy-duty commercial tile production — the 4.1-amp motor and compact blade size limit throughput on large workloads
- Very wide bevel work on thick tile — angled cuts are limited to tiles up to 1/2 inch thick
What to budget alongside this Tile Saw, and what to skip
Accessories worth buying with this Tile Saw
- Replacement diamond blade — the saw uses a 4-1/2-inch blade and consumable blades wear down with tile cutting
- Water for the reservoir — the internal water reservoir needs water to keep the blade wet during cutting
- Tile marking tools — the saw cuts to the line, so you still need a way to mark cut lines before cutting
- Safety glasses — wet tile cutting still throws chips and slurry around the blade area
- Ear protection — the 5000 RPM motor can be loud during repeated cuts
Accessories you can skip buying for this Tile Saw
- Extra blade guard — the saw already has a built-in blade setup for wet cutting
- Extension table — the compact 4-1/2-inch saw is meant for small tile work, so a larger support table is usually unnecessary
- Battery pack — the listed power source is battery powered, so a separate corded power setup is not needed
Where to Buy This Tile Saw
In November 2026 the WEN 71745 was listed at $169.99. Prices move, so read that as a snapshot, not a quote.
Tile saws are sold by the retailers below – we do not track which of them has the WEN 71745 in stock, so check availability and the current price with the retailer before making a trip.
- Northern Tool (online and physical stores) — useful for contractor-oriented tool selection and store pickup
- Grainger (online and physical stores) — business and trade accounts for professional buying
- Toolbarn (online only) — specialist tool retailer with a focused selection
- Home Depot (online and physical stores) — broad range of tile saws and easy in-store returns
- Lowe’s (online and physical stores) — broad range of tile saws with physical-store pickup and returns
- Amazon (online only) — broad selection across brands and models
- Acme Tools (online only) — specialist power-tool retailer with knowledgeable staff and trade accounts
Final Verdict on the WEN 71745
You should choose the WEN 71745 if you need a battery-powered wet saw with a 4-1/2-inch blade and a 45-degree bevel for small tile cuts. At around $169.99, it keeps the entry price low while still giving you a 3/4-inch cutting depth and angled cuts for tile up to 1/2 inch thick.
The 4.1-amp motor and 5,000 rpm blade speed are the strongest data points here. They matter because this saw is aimed at light tile work, not larger-format jobs that need more depth or a bigger blade.
Skip it if: you need more than 3/4 inches of cut depth, or you want a saw for thicker tile and stone. You will spend money on a tool that is sized for smaller cuts.