Will the WEN 71745 4.1A 4.5-Inch Portable WEN 71745 accommodate 45 degree bevel cuts for 1/2 inch tiles?

You must ensure your tile thickness does not exceed 1/2 inch for these specific angled cuts and verify your workspace allows for the 4.5-inch blade’s sweep before starting your first cut.

You can find our full analysis of the WEN 71745 for a deep dive into its technical capabilities.

WEN 71745 wet saw features for 45 degree bevel cuts

The WEN 71745 utilizes a 4.1-amp motor that rotates up to 5000 times per minute to provide the torque needed for angled cuts, which create more friction than straight passes. This wet saw—a machine that uses a water reservoir to cool a spinning blade while cutting stone—includes a sliding miter gauge and a wet saw fence to stabilize the material during the tilt. We selected this model for our comparison because it offers a specific bevel capacity for small-scale masonry work. Because bevel cuts increase the risk of the tile “walking” or slipping, the sliding table provides the necessary support to keep the piece steady. While the 4.5-inch diamond blade (a hard-wearing cutting wheel used for masonry) provides the necessary clearance for the 45-degree sweep, the listing does not state if a specialized blade is required for beveling versus straight cuts.

See the final verdict on the WEN 71745 to determine if it meets your specific project needs.

Proper setup for making 45 degree cuts on 1/2 inch tiles

Choosing a saw that cannot handle the required tilt can result in a wasted project and the need to order replacement materials. A user first measures their tile thickness to confirm it is 1/2 inch or less. They then set the table to the 45-degree angle and engage the sliding miter gauge to secure the piece. Finally, the saw produces a clean, angled edge suitable for corner transitions.

Read the WEN 71745 quick verdict to see a high-level summary of its performance.

Checklist for the WEN 71745 Bevel Capacity

• Confirm your tile thickness is 1/2 inch or less to ensure the saw can complete the angled cut.
• Verify that your workspace provides enough clearance for the 4.5-inch blade to rotate fully at a 45-degree tilt.
• Check that your specific tile type, such as porcelain or ceramic, is compatible with the included ceramic blade material.
• Ensure your power source provides enough consistent energy for the 4.1-amp motor to maintain torque during high-friction beveling.

Comparing the WEN 71745 to Other Tile Saws

The WEN 71745 is a compact option suited for DIY projects involving smaller tiles and limited workspace. Buyers who need to cut large-format tiles or require a higher motor horsepower for heavy stone may find that this model’s 4.5-inch blade and 4.1-amp motor are insufficient. If your project requires cutting much thicker slabs or requires a bridge saw for high-capacity straight cuts, you should look for a larger wet saw with a 10-inch blade or higher power rating.

Find out if the WEN 71745 handles 3/4 inch stone by exploring our detailed compatibility guide.

If you are a DIYer working on residential bathroom or kitchen backsplashes with standard-sized tiles, the WEN 71745 is a practical choice for achieving precise 45-degree corner transitions.

Consider looking at the top-rated portable saws for small jobs if you need a more compact solution.

Reviewed by the New Hardware editorial team. New Hardware writes these guides from the 25 most-reviewed Tile Saw listings in our retail dataset, not from manufacturer copy.