Makita LS1018 Miter Saw Review: 0-60 Degree Right Miter Range for Broad Angle Cuts

The LS1018 in Short

Makita LS1018 Miter Saw cuts 12 inches for you if you need one-pass crosscuts on wide boards.

A 12-inch crosscut lets you handle wider stock in one pass, which changes how quickly trim and shelving move through the saw.

Makita LS1018 delivers that with a 12-inch cutting capacity and 0-45 degrees of bevel adjustment. The corded electric design keeps power tied to an outlet, not a battery pack.

We screened 71 Miter Saws and this is one of 15 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 204 buyer ratings, the 19th most of the 71 screened. This review is for you if you want a corded saw and care most about straight-across capacity.

The Short Answer on the LS1018

Best for: you want a corded 10-inch miter saw with 12-inch straight cuts for home trim and light framing work.

Choose the LS1018 if that setup matches your jobs; it is around $605.88.

• Pro: The 10-inch blade size keeps it in the standard trim-and-framing class.
• Pro: Its 12-inch crosscut capacity handles wide boards in one pass.
• Pro: The 13.0 AMP motor and 4,300 RPM blade speed give you a corded layout for steady shop power.
• Con: The 43.7 lb weight makes it less convenient if you need to move the saw often between rooms or jobsites.
• Con: The 0-45 degree bevel range limits you to standard compound cuts, so buyers needing more tilt travel should look elsewhere.

Don’t buy this if: you need a saw with more than 12 inches of straight crosscut capacity for wider stock.

Price assessment: The $605.88 price is premium for a corded 10-inch saw, so it suits buyers who need the capacity more than a lower entry cost.

Key Specifications for This Miter Saw

Bevel range separates the LS1018 most clearly. It measures how far the saw head can tilt sideways for angled cuts.

Before You Buy: Mitre Saw Checklist

The first thing to check is whether your cuts need only a 0-45 degree bevel range; LS1018 gives you that span, so crown and trim work stays in play only when your angles fit that limit.

• ☐ Confirm your widest straight crosscut—12 inches—because boards wider than that will need a second pass or a different saw.
• ☐ Check your bevel needs against the 0-45 degree adjustment range—if your work needs a steeper tilt, you will have to buy another saw or change the cut plan.
• ☐ Measure the blade size you want to run—10 inches—because a different blade diameter means this saw will not match your planned setup.
• ☐ Budget for a corded setup—13.0 AMP direct drive—because you will need mains power, not a battery system, at the jobsite.
• ☐ Confirm the weight you are willing to move—43.7 lbs—because a lighter saw will be easier to carry if you need frequent relocation.

Do not buy LS1018 if your projects need bevel angles beyond 45 degrees or crosscuts wider than 12 inches.

What the Numbers Mean in Use

What a Wide Miter Range Means in Use

LS1018 gives you a 0-47 degree miter range left and 0-60 degrees right, so you can set common trim angles without moving to a different saw. That matters for angled cuts on casing, picture frames, and other jobs that need repeatable miter settings.

The wider right-hand sweep is useful when your layout calls for repeated acute angles, while the left side still covers standard trim work. If you choose a saw with a narrower range, you may lose time flipping work or changing your cut plan for angled pieces.

How Bevel Control Supports Compound Cuts

LS1018 has a 0-45 degree bevel adjustment on both left and right, which gives you the tilt needed for standard compound cuts. That is the setting you need for crown and casing work where the saw head must lean for the cut angle.

Because the bevel range runs both directions, you do not have to keep turning the work for opposite-lean cuts. The rear-handle bevel lock and 0, 45 degree positive stops help you return to common angles faster during repeated trim work.

What Cutting Capacity Means for Wide Boards

LS1018 cuts up to 12 inches at 90 degrees and 8-1/2 inches at 45 degrees, so it handles wide boards in one pass when the cut is straight. That is enough for many baseboard and shelving jobs, and it also covers the easier end of crown-molding work when the board size stays modest.

At 45 degrees, the 8-1/2 inch figure is the limit that matters for angled crosscuts, so wider stock will need a different cut plan. The 13.0 AMP motor and 43.7 lb weight point to a corded saw for routine shop or jobsite use, not a cordless setup for all-day portability.

The LS1018 Job by Job: What Its Figures Cover

The LS1018 against the jobs buyers ask about, worked out from its listed bevel range and crosscut capacity and motor power and a typical need for each job.

How the LS1018 Compares to Alternatives

Makita’s 10-inch blade and 12-inch crosscut capacity make the LS1018 the clearer fit for buyers who want a compact corded saw without giving up full-width cuts on many trim jobs. Its 13.0 AMP motor and 4,300 RPM speed also put it in the range where clean crosscuts are the goal, not a finish-sanding replacement.

• Against the Bosch GCM18V-12GDCN14, the LS1018 is $10.88 more expensive, but it uses a corded 13.0 AMP setup instead of a battery platform.
• Against the Delta 26-2310, the blade size ties at 10 inches, so the real separation is crosscut width: the LS1018 states 12 inches, while Delta lists 16.
• Against the JET JMS-10X, the LS1018 matches the 10-inch blade size, but JET lists a 15-amp motor where this Makita states 13.0 AMP.
• Against the DEWALT DWS779, the LS1018 is $29.12 cheaper, but DEWALT lists a 12-inch blade with a 15 Amp motor.
• On buyer ratings, the LS1018 sits 4th highest of the 6 compared models, with 4.1 from 204 ratings.

If you want the strongest value for wider stock, the Delta 26-2310 is the better pick because it lists 16 inches of crosscut capacity for only $16.88 more. If your priority is a corded 10-inch saw at a lower price than the DEWALT and JET options, the LS1018 stays easier to justify.

You can also view our full review of the CRAFTSMAN V20 CMCS714M1 to see how it compares.

For a larger option, see how the DEWALT DWS715 performs in our detailed breakdown.

Getting the LS1018 Working, and What to Check After

Getting the LS1018 ready for corded use

The LS1018 needs a corded electric outlet before it does any work.

1. Unpack the saw and confirm the 10-inch blade diameter matches the blade size you plan to use.
2. Set it near a corded electric outlet, since the 13.0 AMP motor depends on mains power.
3. Attach a miter saw blade that matches the 10-inch blade diameter, then lock it in place.
4. Set the bevel adjustment to 0-45 degrees and the miter range to the angle your cut needs.
5. Adjust the work for a 12-inch straight crosscut or an 8-1/2-inch cut at 45 degrees, then make the first cut.

Warranty and support: what to verify for the LS1018

Warranty cover differs by seller and country.

• Confirm the return window before you remove the saw from the box, because the 43.7 lb weight makes repacking more work.
• Confirm whether a 10-inch miter saw blade is included, since the saw needs that diameter to cut.
• Confirm whether a dust bag is included, because this corded saw will still throw sawdust without one.
• Confirm who handles support for the 13.0 AMP motor and linear ball bearing system, since those parts are not user-serviceable in normal use.

On the day it arrives, open the box and verify the 10-inch blade setup before the return window closes.

What Buyers Still Want to Know About This Miter Saw

Is the 13-amp motor strong enough for hardwood and treated lumber without bogging down?

Yes, the 13-amp motor gives LS1018 enough drive for routine hardwood and treated-lumber cuts, but only at the easier end of that job. The data ties 13A to a need of 10 to 15A for that work, so you should expect it to suit normal cuts better than constant heavy production.

Is it worth $605.88 for what it gives up compared with other 10-inch saws?

The LS1018 gives you a 10-inch blade, a 12-inch straight crosscut, and a 0-45 degree bevel range for around $605.88. That price makes more sense if you need a corded saw with those figures, not if you want more capacity or a lighter tool, because this one weighs 43.7 lbs.

Does the Makita LS1018 handle crown molding cuts?

LS1018 handles crown molding at the easier end of the usual range because its bevel adjustment runs from 0 to 45 degrees. Crown work often needs 45 to 50 degrees of tilt, so this saw covers the lower end of that need but leaves no extra margin.

Can the Makita LS1018 cut wide shelving boards in one pass?

Yes, the LS1018 can cut wide shelving boards in one pass because it states a 12-inch crosscut capacity. That also means you should measure your board width first, since anything wider will need a different setup or a second cut.

What kind of power source does the Makita LS1018 use?

LS1018 is a corded electric miter saw, and its 13.0 AMP direct-drive motor depends on mains power. That suits a fixed shop or garage setup better than cordless portability.

How heavy is the Makita LS1018?

The LS1018 weighs 43.7 lbs. That puts it on the heavier side of the field we screened, so you should plan for bench use or short moves rather than frequent carrying.

Consider exploring the alternatives to a miter saw if your needs are more basic.

Ensure your equipment meets standards by viewing the safety certifications for miter saws.

Is the LS1018 Right for You?

Who the LS1018 suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Mitre Saw

The LS1018 sat at $605.88 in the listing data from November 2026; the price you see at checkout can differ.

Miter saws are sold by the retailers below – we do not track which of them has the LS1018 in stock, so check availability and the current price with the retailer before making a trip.

• Ace Hardware (online and physical stores) — local-store convenience for common miter saw options
• Walmart (online and physical stores) — broad mass-market assortment and easy returns
• Home Depot (online and physical stores) — broad range of mainstream miter saws and easy in-store returns
• Lowe’s (online and physical stores) — broad selection for DIY buyers and convenient physical-store pickup
• Amazon (online only) — wide assortment across brands and models
• Acme Tools (online only) — specialist retailer with knowledgeable power-tool focus
• Northern Tool (online and physical stores) — useful for tool-focused shopping and in-store pickup

Final Verdict on the LS1018

You should choose the LS1018 if you want a corded 10-inch miter saw for routine trim, baseboard, and light framing work. Around $605.88 gets you a 13.0 AMP motor, a 12-inch straight-cut capacity, and 0-45 degrees of bevel adjustment.

That 12-inch crosscut figure is the strongest reason to consider it. It gives you enough width for long deck boards and wide shelving boards in one pass, while the corded design keeps the power source simple.

Skip it if: you need a cordless saw for all-day portability, or you need more than 45 degrees of bevel travel for harder crown-cut setups.