KAKA INDUSTRIAL BS-108G Horizontal Band Saw Review: Cuts 9-Inch Round Stock on Single-Phase Power

The BS-108G in Short

KAKA INDUSTRIAL BS-108G Horizontal Band Saw cuts 9 inch round stock for you if you need a single-phase saw for 9-inch bar and tube work.

A 10″x7.9″ rectangular cut changes what you can stage on the saw, because it handles flat and box stock that smaller machines leave out.

KAKA INDUSTRIAL BS-108G brings that result with 10″x7.9″ rectangular stock capacity and a 60 degree maximum miter. The built-in cooling system supports longer cuts by cooling and lubricating the blade path.

We screened 6 Horizontal Band Saws and this is one of 4 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 47 buyer ratings, the 1st most of the 6 screened, and the average is 4.1 from 47 ratings. This review is for you if you need a manual vise, hydraulic descent, and single-phase power in one saw.

The Short Answer on the BS-108G

Best for: you need a single-phase horizontal band saw for 9-inch round stock and 10 x 7.9-inch rectangular stock.

Choose the BS-108G if you want that capacity and a 1.5HP drive for around $1,999.99.

• Pro: The 9-inch round capacity handles 6-inch solid bar and 2-inch pipe jobs with room to spare.
• Pro: The 10 x 7.9-inch rectangular limit supports structural stock better than lighter fabrication saws.
• Pro: Hydraulic downfeed and built-in cooling system support controlled cutting and blade lubrication.
• Con: The 1.5HP motor only sits at the easier end of mixed steel and aluminum work, so heavier-duty cutting asks for more drive than this saw states.
• Con: The 9-inch round capacity rules out 10-inch round stock, so you cannot use it for that heavier fabrication size.

Don’t buy this if: you need to cut 10-inch round stock or larger in a straight 90-degree pass.

Price assessment: Around $1,999.99 is a premium price for a 1.5HP saw, but the capacity and hydraulic features support that tier.

For a broader selection, see which models are the best horizontal band saw for metal cutting.

Key Specifications for This Horizontal Band Saw

Round cutting capacity at 90° most separates BS-108G here. It measures the largest round stock the saw can cut straight across at a right angle.

Before You Buy: Horizontal Bandsaw Machine Checklist

The first thing to check is whether your stock fits the 9-inch round and 10 x 7.9-inch rectangular limits, because insufficient capacity means the saw cannot take the cut at 90 degrees or in miter.

• ☐ Confirm your power supply matches single phase motor operation — otherwise the saw may not install on your circuit, and you will need a different machine or electrical work.
• ☐ Measure the round stock you plan to cut — 9 inches is the stated round capacity, and anything larger will force a return or a heavier saw.
• ☐ Check your flat or box stock against the 10 x 7.9-inch rectangular limit — oversize material will not fit, so you would need to rework the job or buy a larger saw.
• ☐ Budget for two-person handling if needed — the weight exceeds 100 lbs, so one person may not want to place it alone and may need help moving it.
• ☐ Confirm the 60-degree miter range covers your angled cuts — if your job needs more than that, you will have to change the cut plan or choose another saw.

Do not buy this saw if your shop cannot support single phase motor power or your stock is larger than 9 inches round.

What the Numbers Mean in Use

What the cutting capacity means for common stock sizes

BS-108G cuts 9-inch round stock and 10 x 7.9-inch rectangular stock, so you can handle common bar, pipe, and flat stock without changing machines for those sizes. That matters when your work includes both round and rectangular material, because the saw covers the two shapes you are most likely to feed it in one setup.

The 9-inch round figure supports 6-inch solid bar prep and 2-inch pipe work, but it does not support 10-inch round stock for heavier fabrication. Think of it like a gate sized for the parts you actually send through it; once the stock is larger than the opening, the job stops there. If you need one saw for mixed steel and aluminum, the 1.5HP motor is enough at the easier end of that range, but the capacity numbers are the deciding limit for the stock size itself.

How the 60-degree swivel miter helps angled cuts

BS-108G miteres to 60 degrees, so you can make angled cuts for frame work, brackets, and repeat parts without re-clamping every time. The angle indicator and quick act lock handle give you a clear setting and a fast way to fix the swivel head, which helps when the same angle needs to repeat across a batch.

A 60-degree swivel range gives you more angle room than a simple straight-cut saw, and that matters when the job calls for compound layouts or non-square ends. The material stop also supports repeat cuts, so you can run the same length after the angle is set. The vise is manual, so the clamping step stays in your control rather than being automatic.

How hydraulic downfeed and coolant support regular steel work

BS-108G includes hydraulic descent and a built-in cooling system, so you get controlled lowering of the saw head and coolant for cooling and lubricating the cut. That combination suits regular steel work, because the 1.5HP single-phase motor gives you a light-to-moderate drive level rather than a heavy industrial one.

The hydraulic feed helps the saw stay usable on longer cuts, while the cooling system supports blade life when you are working through steel or other mixed materials. The single-phase motor also keeps the power requirement simple for common shop wiring, and that matters if you need a saw that can be installed without a special three-phase setup. The operation panel with start and automatic stop adds a basic control path for routine shop use, but the machine still depends on the 1.5HP drive and the stock limits above.

Which Jobs the BS-108G Handles, Worked Out From Its Specs

The BS-108G against the jobs buyers ask about, worked out from its listed motor power and round cutting capacity at 90° and a typical need for each job.

Budget-conscious buyers can find the best horizontal band saw for a small shop under $7000.

How the BS-108G Compares to Alternatives

BS-108G is the cheapest of the six compared at around $1,999.99, yet it still states 9-inch round capacity and 10 x 7.9-inch rectangular capacity with 1.5HP drive power. That mix gives you a lower entry price without giving up the cut sizes many shop jobs need. Good value. For the money.

• Against the Baileigh BS-210M Horizontal Band Saw, BS-108G costs about $1,609.01 less. The Baileigh lists 1HP, so BS-108G gives you more motor power for less money.
• Against the Jet J-7015 Horizontal Bandsaw, the key difference is capacity. BS-108G states 9-inch round stock, while the Jet lists 1.5 hp and a 45-degree vise swivel instead of a larger round figure.
• Against the Jet HBS-916 Horizontal Bandsaw, BS-108G is the lower-cost choice by about $3,179.01. The Jet adds fully-adjustable hydraulic downfeed, while BS-108G states hydraulic descent and a built-in cooling system.
• Against the JET Elite EHB-916V, BS-108G is about $4,859.01 cheaper. The JET Elite adds an automatic blade shut off switch, so that model favors buyers who want that extra stop feature.
• Against the Baileigh BS-350SA, BS-108G gives up round capacity. The Baileigh lists 10.63 inches, so it is the better pick for larger solid bar work.

If you need the larger round-cutting envelope for heavy fabrication, pick the Baileigh BS-350SA instead. If your job centers on smaller stock and a lower purchase price, BS-108G is the cleaner buy.

If you need a more compact option, view our full review of the Jet HBS-916.

Compare these specs against the full review of the Baileigh BS-210M.

Getting the BS-108G Working, and What to Check After

Power and setup for This Horizontal Band Saw

BS-108G needs single-phase power before it can do any useful cutting.

1. Place the saw where a single-phase supply is available and where the 100+ lb frame can sit level.
2. Connect it to the correct single-phase circuit for the motor, then confirm the panel starts and the automatic stop works.
3. Set the swivel head to the needed angle, using the 60-degree maximum and the angle indicator for reference.
4. Load the workpiece in the manual vise, then lock it with the quick act handle before you start the cut.
5. Fill and activate the built-in cooling system, then make the first cut with hydraulic descent engaged.

A bandsaw blade is the consumable that does the cutting, and coolant should match the saw’s built-in cooling system. A wrong blade or dry operation turns the first setup into a wasted return window and a replacement buy.

Warranty and support: what to confirm after delivery

Warranty cover differs by seller and country.

• Confirm the return window before it closes, because the BS-108G weighs more than 100 lbs and a return can be costly to move.
• Confirm blade size and fit, because the saw does not state the blade specification in the supplied data.
• Confirm coolant compatibility, because the built-in cooling system needs coolant that works with that system.
• Confirm whether a work stop and roller stand are included or need to be bought separately, because repeat cuts and long stock handling depend on them.

On the day it arrives, inspect the saw for shipping damage and verify the single-phase power requirement before the return window starts running.

What Buyers Still Want to Know About This Metal Cutting Bandsaw

Cutting capacity and motor power

BS-108G cuts 9-inch round stock and 10 x 7.9-inch rectangular stock at 90 degrees, with a 1.5HP motor. That combination matters more than a bigger nameplate alone, because the round capacity handles 6-inch bar work, but not 10-inch round stock.

What the miter range changes

The BS-108G miter range reaches 60 degrees, and the angle indicator helps you set the swivel angle. That wider swing suits angled cuts on repeat jobs, while the material stop supports the same cut length over and over.

Coolant, hydraulic descent, and start-stop control

BS-108G includes a built-in cooling system, hydraulic descent, and an operation panel with start and automatic stop. The cooling system is there for cooling and lubricating, while hydraulic descent gives you controlled blade feed instead of a purely manual drop.

Questions Buyers Still Ask About This Metal Cutting Bandsaw

Can the KAKA INDUSTRIAL BS-108G cut 10-inch round stock?

No, BS-108G is listed for 9-inch round stock, so 10-inch round stock is outside its stated capacity. That matters if your work regularly starts with large solid bar, because the saw’s round capacity is the limiting figure here.

Does the KAKA INDUSTRIAL BS-108G run on single-phase power?

Yes, BS-108G runs on a single-phase motor. That suits common shop wiring, and it avoids the heavier power setup that some larger horizontal band saws need.

Is the KAKA INDUSTRIAL BS-108G good for repeat cuts?

Yes, BS-108G includes a material stop for repeat cuts. That feature helps when you need the same length over and over, especially on batch work where consistency matters more than setup speed.

What does the 60-degree miter on the KAKA INDUSTRIAL BS-108G mean for me?

The 60-degree miter lets BS-108G make angled cuts beyond simple square cuts. It gives you more layout flexibility on frames, brackets, and other jobs that need non-90-degree cuts.

Is the BS-108G Right for You?

Who the BS-108G suits and the jobs it is the wrong choice for, listed below with the reason for each.

Homeowners should explore the best horizontal band saw for home garage under $7000.

Where to Buy This Horizontal Band Saw

The BS-108G sat at $1999.99 in the listing data from November 2026; the price you see at checkout can differ.

Horizontal band saws are sold by the retailers below – we do not track which of them has the BS-108G in stock, so check availability and the current price with the retailer before making a trip.

• Grainger (online and physical stores) — breadth of range for industrial metalworking equipment and business accounts
• Northern Tool + Equipment (online and physical stores) — useful for a mix of shop tools, in-store pickup, and returns
• MSC Industrial Supply (online only) — useful for industrial breadth and trade account purchasing
• Travers Tool Co. (online only) — useful for specialist staff and metalworking-focused selection
• Baileigh Industrial (online only) — useful as a specialist source for this category and direct manufacturer support
• JET Tools (online only) — useful as a specialist source for this category and product-line coverage
• Amazon (online only) — useful for marketplace breadth and easy comparison shopping

Final Verdict on the BS-108G

You should choose the BS-108G if your work stays within 9-inch round stock and 10 x 7.9-inch rectangular stock, and you want a single-phase saw with hydraulic downfeed and coolant. Around $1,999.99 buys a horizontal band saw that fits that job profile without stepping into heavier-capacity territory.

The 1.5HP motor is the strongest single spec here for the cutting job itself. It gives you enough drive for mixed steel and aluminum at the easier end of the range, and it is also the reason this saw stays in the lighter-duty class.

Skip it if: you need to cut 10-inch round stock, or you need a machine with more than 1.5HP for tougher material work.