CRAFTSMAN V20 CMCS714M1 Miter Saw Review: LED Cut Line Positioning for Clear Blade Alignment

Where the V20 CMCS714M1 Fits

CRAFTSMAN V20 CMCS714M1 Miter Saw cuts 8-inch boards for you if you need a cordless saw for smaller crosscuts.

A cordless miter saw with an 8-inch crosscut capacity keeps small trim and board cuts within one setup, rather than forcing a larger saw for every job.

CRAFTSMAN V20 CMCS714M1 turns that into a compact battery-powered option with a 7-1/4 inch blade and 90 Degrees of bevel range. It also carries a 4.7 average from 700 buyer ratings, and it lists around $249.

We screened 71 miter saws, and this is one of 15 chosen for a full review. Full reviews go to the most-rated products that pass screening, at most 2 per brand. This one has 700 buyer ratings, the 9th most of the 71 screened. If you want cordless portability and you mostly cut trim, baseboard, or narrower stock, this review is for you.

The Short Answer on the V20 CMCS714M1

Best for: you want a cordless miter saw with 8-inch crosscut capacity for trim, baseboard, and small DIY cuts.

Choose the V20 CMCS714M1 if you want a 20V cordless saw with a 7-1/4 inch blade and side carry handles, around $249.

• Pro: The 8-inch crosscut capacity handles trim, door casing, and window casing in one pass.
• Pro: The 90-degree bevel range supports compound cuts for crown and casing work.
• Pro: The 21.8-pound weight and side carry handles make it easier to move between rooms.
• Con: The 8-inch crosscut limit will not suit wide shelving boards that need 10 to 14 inches of capacity.
• Con: The single-bevel design slows repeated angled cuts because you need to flip the work for the opposite tilt direction.

Don’t buy this if: you need a sliding miter saw for 10-inch or wider crosscuts in one pass.

Price assessment: $249 is fair for a cordless 20V kit with this cut capacity and a 4.7 average from 700 ratings.

For a different brand option, see our full review of the Makita LS1018.

If space is a concern, find the top miter saw for small workshop options.

The Specifications That Matter for this Miter Saw

Crosscut capacity is the row that most separates the V20 CMCS714M1 here. It measures the widest board or workpiece the saw can cut straight across in one pass.

Before You Buy: Mitre Saw Checklist

The first thing to check is whether the 8-inch crosscut capacity matches the boards and trim you plan to cut in one pass. If it does not, you will end up trimming wider stock in two passes or choosing a larger saw.

• ☐ Confirm your widest straight cut fits the 8-inch crosscut capacity — if your stock is wider, you will have to reposition it or buy a saw with more reach.
• ☐ Check that your angled cuts work with the 5-1/2-inch crosscut at 45 degrees — if you need more width at that angle, the cut will not finish in one pass.
• ☐ Measure your crown and casing needs against the 90 Degrees bevel range — if your job needs a different tilt direction or a wider bevel setup, you will have to flip work or choose another saw.
• ☐ Confirm the 7-1/4 inch blade suits your material size — if you plan to cut wider boards or molding, you may need a different blade size and a different saw.
• ☐ Check whether 21.8 Pounds works for your carry and storage needs — if you want a lighter tool for frequent moves, this weight will be harder to handle between rooms or job sites.
• ☐ Budget for a cordless setup at 20 Volts — if your plan depends on corded runtime, this battery-powered saw will not match that workflow.

You should not buy this saw if your project needs wider one-pass cuts than 8 inches or a lighter tool than 21.8 Pounds.

Performance: What the Specs Deliver

How LED cut line visibility helps with basic home cuts

The LED cut line positioning system helps you line up 2x lumber, baseboard, and trim for basic home cuts. V20 CMCS714M1 also states 8-inch crosscut capacity at 90 degrees, which is enough for common straight cuts on trim and smaller boards. That matters when you want one saw for beginner projects without stepping up to a larger sliding model.

Can it handle the usual cuts for a first trim job? Yes, because the 8-inch straight crosscut gives you room for many home-project pieces, while the LED line helps you place the cut where you want it. The same capacity is not enough for wide shelving boards in one pass, so this saw suits smaller stock better than oversized boards.

How brushless battery power supports cordless work

The brushless 20V battery setup supports cordless work for jobs where portability matters more than a cord. V20 CMCS714M1 is listed at 21.8 pounds, so the cordless format keeps setup simple for moving between rooms or taking the saw to a jobsite. The battery claim of up to 585 cuts in 3-1/4-inch MDF baseboard on a single charge gives you a clear workload target for trim-heavy days.

If you want a saw for repeated baseboard or trim cuts, that cut count is the main trade-off to watch. It supports long sessions on smaller material, but the 7-1/4-inch blade size keeps this in the compact class rather than the wider-capacity group used for large stock. For standard home trim, that is a practical mix; for wide boards, it is the wrong size class.

How miter stop precision supports repeatable angle cuts

The 9 casted miter detent stops give you repeatable angle positions for picture frames, casing, and other parts that use the same setting more than once. The 90-degree bevel range also matters here, because it supports the tilt range used for crown and casing cuts. If you need bevel and miter work for trim, this saw covers the common angles used in those jobs.

V20 CMCS714M1 also lists a single bevel design, so the head tilts one way only and you flip the work for matching angled cuts. That is fine for basic home trim, but it slows repeated compound work compared with a double bevel saw.

Common Buyer Jobs Checked Against the V20 CMCS714M1’s Specs

The V20 CMCS714M1 against the jobs buyers ask about, worked out from its listed crosscut capacity and a typical need for each job.

New users should explore our guide to the best miter saw for beginners.

How the V20 CMCS714M1 Compares to Other Miter Saws

When you need to trim baseboard or casing without moving up to a larger saw, the V20 CMCS714M1 gives you 8-inch crosscuts and a 90-degree bevel range for around $249.

• Against the DEWALT DWS713R, the V20 CMCS714M1 gives you more crosscut capacity. DEWALT states 2-inch x 6-inch, while this Craftsman lists 8-inch at 90 degrees.
• Against the RYOBI P553 18V 7-1/4 in. Miter Saw, the V20 CMCS714M1 has the larger bevel range. This Craftsman lists 90 Degrees, and the Ryobi states 45 Degrees.
• Against the RYOBI 7-1/4-Inch Sliding Miter Saw, the V20 CMCS714M1 is the cheaper non-sliding option. It is around $249, while the Ryobi sits at $238.99 and adds a sliding format.
• Against the Ryobi EMS190DCL Miter Saw, the V20 CMCS714M1 carries the higher buyer rating. It is rated 4.7 from 700 buyer ratings, while the Ryobi is rated 4.3 from 190 ratings.
• Against the WEN MM1015 Miter Saw, the V20 CMCS714M1 gives up blade diameter and price. This Craftsman uses a 7-1/4 inch blade and lists 8-inch crosscuts, while WEN states a 10-inch blade and 12 inches of crosscut capacity for around $232.90.

If you want the widest cut capacity for the money, the WEN MM1015 is the better pick. If you want the strongest bevel figure in this group and can live with 8-inch crosscuts, the V20 CMCS714M1 is the one to keep.

You might also consider viewing the DEWALT DWS779 spec breakdown for comparison.

From Delivery to First Use with This Miter Saw

Getting the V20 CMCS714M1 ready

A 20-volt battery is the one thing you need before the V20 CMCS714M1 does useful work.

1. Charge or install a 20-volt battery before the saw leaves the box.
2. Fit a 7-1/4 inch miter saw blade, and match that diameter exactly.
3. Set the bevel to 90 Degrees for straight cuts or compound work that uses the saw’s tilt.
4. Choose the cut line with the LED cut line positioning system, then lock in the 9 casted miter detent stops if one of those angles suits the job.
5. Use the dust bag if you buy one separately; its fit depends on the saw’s dust port, which is not stated here.

Warranty and support checks for this mitre saw

Warranty cover varies by seller and country.

• Confirm the blade size covered by any parts claim, because the saw uses a 7-1/4 inch blade and replacements are size-specific.
• Confirm battery coverage, because the 20-volt pack is the part most likely to control runtime and replacement cost.
• Confirm support for the brushless motor, because motor service terms matter on a battery saw with 80 watts listed.
• Confirm return handling for the 21.8-pound saw, because shipping a heavy tool back can cost time and money.

On the day it arrives, inspect the saw, battery, and blade fit while the return window is still open.

The V20 CMCS714M1: Remaining Questions

Does the battery last long enough for a full day of cutting without constant recharging?

V20 CMCS714M1 states up to 585 cuts in 3-1/4-inch MDF baseboard on a single charge. That is the runtime figure that matters here, and it points to long sessions without frequent charging when your cuts stay near that workload. A full day with heavier stock is not stated.

How much crosscut capacity does the CRAFTSMAN V20 CMCS714M1 have?

V20 CMCS714M1 lists an 8-inch cross cut capacity at 90 degrees. That is enough for trim, casing, and other narrower stock, but wide shelving boards need more reach than this figure gives. For a living room baseboard install, the listed capacity covers the easier end of the job.

Is the CRAFTSMAN V20 CMCS714M1 good for crown molding cuts?

Yes, the V20 CMCS714M1 has a 90-degree bevel range and a single-bevel layout. That gives you the tilt range needed for common crown and casing angles, but the one-way tilt means repeated compound cuts require flipping the work. Buyers who cut the same angle often should weigh that time trade-off.

How portable is the CRAFTSMAN V20 CMCS714M1?

The V20 CMCS714M1 weighs 21.8 pounds and includes side carry handles. That makes the saw easier to move than heavier corded models, especially for jobsite carry or storage between small projects. The cordless format also avoids cord management during setup.

What kind of buyer fits the CRAFTSMAN V20 CMCS714M1?

V20 CMCS714M1 suits budget-first buyers who want a cordless 7-1/4-inch miter saw for trim, baseboard, and small DIY cuts. The $249 price and 4.7 average from 700 ratings give useful context, but the deciding limits are the 8-inch crosscut and single-bevel design. If you need wider boards or faster repeated compound cuts, this is the wrong size class.

Always verify your equipment meets required certifications and safety standards for miter saws.

Is the V20 CMCS714M1 Right for You?

Who the V20 CMCS714M1 suits and the jobs it is the wrong choice for, listed below with the reason for each.

Where to Buy This Miter Saw

When we looked in November 2026, the V20 CMCS714M1 was listed at $249 – a snapshot that may have changed since.

Miter saws are sold by the retailers below – we do not track which of them has the V20 CMCS714M1 in stock, so check availability and the current price with the retailer before making a trip.

• Home Depot (online and physical stores) — broad range of mainstream miter saws and easy in-store returns
• Lowe’s (online and physical stores) — broad selection for DIY buyers and convenient physical-store pickup
• Amazon (online only) — wide assortment across brands and models
• Acme Tools (online only) — specialist retailer with knowledgeable power-tool focus
• Northern Tool (online and physical stores) — useful for tool-focused shopping and in-store pickup
• Ace Hardware (online and physical stores) — local-store convenience for common miter saw options
• Walmart (online and physical stores) — broad mass-market assortment and easy returns

Final Verdict on the V20 CMCS714M1

You need a cordless miter saw with an 8-inch crosscut capacity and a single-bevel head for light trim work. The V20 CMCS714M1 is around $249.

Its 7-1/4-inch blade and 90-degree bevel range define a compact saw that handles crown and casing cuts without a larger sliding setup. The 4.7 average from 700 buyers adds useful context, and the 21.8-pound weight keeps the package relatively easy to move.

Skip it if: you need one-pass cuts on wider shelving boards, or you want a sliding miter saw with more crosscut capacity.